Yamaha CA-1010 specifications
Category : Integrated amplifier
Brand : Yamaha
General
Connections
Technical data
Special equipment
- Manufacturer: Yamaha
- Model: CA-1010
- Years of construction: 1977 – 1979
- Color: Front silver, wooden case (veneered)
- Remote control: No
- Power consumption: 900 W max.
- Dimensions (W×H×D): 461 × 170× 360 mm
- Weight: 20 kg
- Factory price approx.: 1.900,- DM
- Number of inputs: 7
- Phono 1 MM: 2 mV/ 47, 68, 100 k643961b8da111c0a15d770a1109a86d4 (selectable)
- Phono 2 MM: 2 mV/ 47 k643961b8da111c0a15d770a1109a86d4. MC: 50 mV, 10 643961b8da111c0a15d770a1109a86d4
- Tuner, Aux: 120 mV/ 50 k643961b8da111c0a15d770a1109a86d4
- 2× Tape
- Pre-In: 1 V, 25 k643961b8da111c0a15d770a1109a86d4
- Number of Outputs: 6
- 2× Rec-Out: 120 mV/ 600 643961b8da111c0a15d770a1109a86d4
- Pre-Out: 1 V/ 500 643961b8da111c0a15d770a1109a86d4
- 2× speaker pairs
- Headphones (6.3mm jack)
- Phono 1 MM: 2 mV/ 47, 68, 100 k643961b8da111c0a15d770a1109a86d4 (selectable)
- Phono 2 MM: 2 mV/ 47 k643961b8da111c0a15d770a1109a86d4. MC: 50 mV, 10 643961b8da111c0a15d770a1109a86d4
- Tuner, Aux: 120 mV/ 50 k643961b8da111c0a15d770a1109a86d4
- 2× Tape
- Pre-In: 1 V, 25 k643961b8da111c0a15d770a1109a86d4
- 2× Rec-Out: 120 mV/ 600 643961b8da111c0a15d770a1109a86d4
- Pre-Out: 1 V/ 500 643961b8da111c0a15d770a1109a86d4
- 2× Speaker pairs
- Headphones (6.3mm jack)
- Continuous power (20 - 20,000 Hz)
- 8 ohms, Class B: 2× 100 Watts
- 4 ohms, Class B: 2× 145 watts
- 8 ohms, Class A: 2× 22 watts
- Dynamic power
- 8 643961b8da111c0a15d770a1109a86d4:
- 4 643961b8da111c0a15d770a1109a86d4:
- Power bandwidth (with total harmonic distortion):
- 8 643961b8da111c0a15d770a1109a86d4, Class B: 20 Hz - 50 kHz (0,02 %)
- 8 643961b8da111c0a15d770a1109a86d4s, Class A: 10 Hz - 70 kHz (0,02 %)
- Total harmonic distortion: 0.02 %
- Attenuation factor: > 45 (1 kHz, 8 ohms)
- Frequency response:
- Phono 1.2MM/MC: 30 Hz – 15,000 kHz (± 0.02 dB RIAA)
- Tuner to PreOut : 15 Hz – 100,000 kHz (+0 dB, -1 dB)
- Tuner up to LS Out (8 643961b8da111c0a15d770a1109a86d4s): 5 Hz – 50,000 kHz (+0 dB, -1 dB)
- Signal-to-noise ratio (IHF A):
- Phono 1.2MM: 82 dB
- Phono 2 MC: 65/68 dB
- Tuner, Aux, Tape: 100 dB
- Pre-In: 115 dB
- Tone control:
- Bass: ± 10 dB (125 Hz, 500 Hz)
- Treble: ± 10 dB (2.5kHz, 8 kHz)
- Loudness: No
- High Filter: 15 Hz, 12 dB/Oct.
- Subsonic: 10 kHz, 12 dB/Oct.
- Mute: 2 steps (- 20 dB, Off)
- Direct/Line-Straight: Bass and treble can be switched off individually
- 8 643961b8da111c0a15d770a1109a86d4, Class B: 2× 100 Watt
- 4 643961b8da111c0a15d770a1109a86d4, Class B: 2× 145 Watt
- 8 ohm, Class A: 2× 22 Watt
- 8 643961b8da111c0a15d770a1109a86d4:
- 4 643961b8da111c0a15d770a1109a86d4:
- 8 643961b8da111c0a15d770a1109a86d4, Class B: 20 Hz - 50 kHz (0,02 %)
- 8 643961b8da111c0a15d770a1109a86d4s, Class A: 10 Hz - 70 kHz (0,02 %)
- Phono 1.2 MM/MC: 30 Hz – 15,000 kHz (± 0.02 dB RIAA)
- Tuner to PreOut: 15 Hz – 100,000 kHz (+0 dB, -1 dB)
- Tuner to LS Out (8 ohm): 5 Hz – 50,000 kHz (+0 dB, -1 dB)
- Phono 1, 2MM: 82 dB
- Phono 2 MC: 65/ 68 dB
- Tuner, Aux, Tape: 100 dB
- Pre-in: 115 dB
- Bass: ± 10 dB (125 Hz, 500 Hz)
- Treble: ± 10 dB (2.5 kHz, 8 kHz)
- Class A selectable up to 2x 22 watts
- 2 phono inputs for MM (1x selectable capacity adjustment) and MC
- Recording source selector (record selector)
- VU power display with selectable range of use
- Peak frequency of the tone controls can be switched
- Mono/ stereo/ stereo reverse switch
- Low and high filters
- European version of the CA-1000 III
- Other models of the same series:
- CA-410
- CA-610
- CA-710
- CA-810
- CA-1010
- CA-2010
- Device presentation at good-old-hifi: [1]
Comment:
Comment box:
Yamaha CA-1010 relate