flutter: Of 0.025% WRMS (JIS C5521), ±0,035% (DIN)
rumple-to-noise ratio:
DIN 45539A: 55 dB
DIN 45539B: 78 dB
turntable: aluminum die casting, 330 mm
operating mode: Manual
Pitch: ± 9,9 %
high running torque: 1.5 kg.cm
tonearm: S-balances tubular arms, static
Eff. Tonearm mass 16 g
Needle support: 0 - 3 g
Effective arm length: 230 mm
Overhang: 15 mm
Angle of curvature: 21.5°
Mass of the headshell: 9.5 g
Weight range for pickups: 5 - 11 g
Pickups: Technics EPC-270 C -II (MM standard system as original equipment)
DIN 45539A: 55 dB
DIN 45539B: 78 dB
Eff. Tonearm mass 16 g
Needle support: 0 - 3 g
effective arm length: 230 mm
Overhang: 15 mm
Angle of curvature: 21.5°
Mass of the headshell: 9.5 g
Weight range for pickups: 5 - 11 g
Construction with SUBCHASSIS
Other models of the same series:
Tech nics SL-23
Tech nics SL-1300 MK 2
Tech nics SL-1310 MK 2
Tech nics SL-1400 MK 2
Tech nics SL-1410 MK 2
Tech nics SL-1410 MK 2
Tech nics SL-1500 MK 2
Tech nics SL-1510 MK 2
Tech nics SL-1600 MK 2
Tech nics SL-1610 MK 2
Tech nics SL-1700 MK 2
Tech nics SL-1710 MK 2
Tech nics SL-1900
< li>Tech nics SL-2000
Tech nics SL-23
Tech nics SL-1300 MK 2
Tech nics SL-1310 MK 2
Tech nics SL-1400 MK 2
Tech nics SL-1410 MK 2
Tech nics SL-1500 MK 2
Tech nics SL-1510 MK 2
Tech nics SL-1600 MK 2
Tech nics SL-1610 MK 2
Tech nics SL-1700 MK 2
Tech nics SL-1710 MK 2
Tech nics SL-1900
Tech nics SL-2000
Very nice, solid and heavy equipment. Unfortunately, the lift unit is defective in almost all used devices. The reason is a broken plastic ring with a bracket for the lift function. Unfortunately, the corresponding spare part ((S) SFPAB13204A) has not been available at Tech nics or Panasonic for a long time. Meanwhile, there are replica parts from the 3D printer in the USA that fit very well and should also work, see here [[1]].
Skilled hobbyists have also successfully repaired broken levers, see here [[2]]