Tascam DM 3200 specifications

Category : mixer

Brand : Tascam

General

Tech nical data

• Manufacturer: Tascam
• Model: DM 3200
• Type: 48-channel digital mixer
• Years of construction: 2004 - 2012
• Manufactured in: Japan
• Mains voltage: 230 V AC, 50 Hz
• Power consumption: 65 W
• Dimensions including support (WxHxD): 700 x 230 x 824 mm
• Weight: 24 kg
• Factory price approx.:

• 16 Busausgänge, eight AUX Sends (Aux), Stereo output,
• full parameters of a 4-Band EQ, and dynamics processing
• dynamics processing in each of these outputs
• Built-in effect processors
• Built-in TC Reverb (hall device)
• preview 16 touch-sensitive, motorized fader for channel level
• buttons for channel selection, Mute and rotary encoder (Encoder)
• 5 mixing layers (channels 1-16, 17-32, Return 1-16, Bus 1-16, Aux out 1-8)
• Talkback microphone
• Flexible Routing
• Surround capability with Panning up to 6.1
• Built-in Automation
• Total Recall by project management
• 16 balanced Mic/line inputs (XLR ) with phantom power
• 16 insert paths (Jack)
• 4 assignable Sends and Returns
• Balanced output (XLR )
• single-ended Studio monitor output (RCA)
• Balanced control room monitor output (Jack)
• single-ended two-track-input (RCA)
• Two AES /EBU interface (XLR ), two SPDIF interfaces (coaxial)
• ADAT-interface (optical, 8 channels)
• Three TDIF-1 interface (24 channels)
• Two headphone outputs
• Timecode input (RCA)
• word clock input and output
• MIDI In/Out/Thru, MTC-output
• Two slots for additional interfaces
• sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• resolution: 24-Bit
• Same mixing configuration with 96-kHz, 48-kHz
• Special Daisy-chain port for the connection of two DM-3200
• Optional meter bridge (MU-1000)
• Direct connection to DAW Software via the optional FireWire card
• drive control
• Surround Monitoring with optional map
• storage internal data on CompactFlash card
• included: Tascam Software Mixer Companion
• Driver-free USB connection with a Computer
• data backup/restore via USB
• GPI functionality (8 outputs)
• connector for footswitch (RC-30P)
• Serial interface (RS-422) to control external devices
• MIC inputs (channels 1 to 16): XLR connector (female)symmetrical
• Line inputs (channels 1 to 16): 6.3 mm jacks balanced TRS
• insert paths (channels 1 to 16): 6.3 mm Jack sockets, 3-pin
• Assignable Returns (1 to 4): 6.3 mm TRS jacks, balanced
• Assignable Sends (1 to 4): 6.3 mm Jack sockets, pseudo-symmetrical
• output impedance: 100 643961b8da111c0a15d770a1109a86d4s
• Jack two-track input (L/R): 2 RCA jacks
• stereo main output (L/R): XLR connector (plug), balanced
• the control room monitor output: 6.3 mm jacks, pseudo-symmetrical
• Studio-monitor output: RCA jacks
• headphone output: 2 stereo jacks
• digital inputs (1,2): between 2 XLR to 2 RCA
• word length: 24-Bit, selectable sampling rate Converter
• digital outputs (1, 2): 2 XLR connectors (plug), 2 RCA jacks
• ADAT-interface: 2 optical light guide connectors
• word clock input: BNC connectors
• word clock output/sockets switchable passage: BNC connectors
• MIDI input/output/pass-through, MTC output: 3 DIN connector, 5-pin
• USB: USB 1.1 port, type B (12 Mbps)
• time code input: RCA connector, in accordance with SMPTE specification
• foot switch connection: 6.3 mm mono Jack
• port for optional meter bridge MU-1000: Sub-D-connector (female)
• EQ switch: on/Off
• filter types: bell filter, Notch filter
• Display and signal level display: backlit LCD Display
• Fader: 17 touch-sensitive motorized faders, travel 100 mm
• Included accessories: power cord, quick start CompactFlash-card

• Other models from the same series:
• Tascam DM 3200
• Tascam DM 4800

• image: Tascam DM 3200

• image: Tascam DM 3200

Comment:

Comment box:

Tascam DM 3200 relate

Tascam DM 4800

Tascam M 06

Tascam M 1 B

Tascam M 1 MK II

Tascam M 1016

Tascam M 1024

Tascam M 106

Tascam M 108

Tascam M 1508

Tascam M 1516

Tascam M 208

Tascam M 216

Tascam M 224

Tascam M 2516

Tascam M 2524

Tascam M 2600/16

Tascam M 2600/24

Tascam M 2600/32

Tascam M 308 B

Tascam M 312 B