Tascam DA-P 1 specifications

Brand : Tascam

General

connectors

Tech nical data

Mic/Line inputs: XLR balanced, +4 dBm, 2,5 kOhm
- microphone: -60 dBm (-20 dB PAD, switchable)
- RCA unbalanced, -10 dBV, 35 kOhm
Line outputs: RCA, unbalanced, -10 dBV, 500 Ohm ,
digital input/output: RCA, SPDIF

Tape Speed: SP - 8.15 mm/s: LP - 4.075 mm/s
- Recording Time (120 DAT): SP - 120 minutes; LP - 240 minutes
- Fast Winding Time: Approx 60 seconds (120 tape)
- Recording Resolution: SP - 16-bit linear; LP - 12-bit non-linear
- Recording Sample Rate: SP - 44.1 kHz, 48kHz; LP - 32 kHz
Frequency Response: 20Hz-20kHz ±0.5 dB, SP; 20Hz-14.5 kHz LP
Signal-to-Noise Ratio: >90dB Playback (SP)
Total Harmonic Distortion: <0.007% Playback (SP)
Wow and Flutter: Unmeasurable (<0.001%)
- Mic/Line XLR Inputs: Mic Setting: Balanced -60dBm (0.8 mV), 2.5 kOhm -20dB switchable pad
- Line Setting: Balanced +4dBm (1.2 V), 10kOhm
Analog Line-In: Unbalanced RCA-10dBV (0.3 V), <35kOhm
- analogue Line Out: Unbalanced RCA-10dBV (0.3 V), 500 Ohm
Digital Coaxial I/O: Coaxial IEC 60958 Type II
Headphone Output: 15mW + 15mW @ 32 Ohm s
Average Battery Life:
- Approx 120 minutes, phantom power off
- Approx 100 minutes, phantom power on

Mic/Line XLR Inputs: Mic Setting: Balanced -60dBm (0.8 mV), 2.5 kOhm -20dB switchable pad
Line Setting: Balanced +4dBm (1.2 V), 10kOhm

Professional portable DAT Recorder DA-P1 for the recording and playback of audio material on DAT tapes, switchable sampling frequency, built-in Limiter to limit signal peaks, balanced XLR microphone/Line inputs, unbalanced Line inputs, switchable phantom power, switchable attenuator (-20 dB), no SCMS copy protection, illuminated LC-Display for ABS-Timecode, Remain, Program Time and Margin, headphone output with level control, switchable lock for controls, approximately two hours of recording time with fully charged battery, an external power supply.