T+A Pulsar R 1260 R specifications

Category : Receiver

Brand : T+A

Brand: T+A

Model: Pulsar R 1260 R

Other models of the same series:

Preamplifier
- Frequency response (+0 -3 dB): 0.5 Hz – 400 kHz
- External/noise voltage distances
- High level: 7 x 104 / 109 dB
- Subsonic filter: 14 Hz
- Total harmonic distortion: < 0.001 %
- Intermodulation < 0.001 %
- Channel separation > 90 dB
- Nominal input sensitivity
  - High level: 250 mV / 20 kOhm
  - Phono MM (optional) 1 - 5 mV / 16 capacitances
  - Phono MC (optional) 60 - 1000 µV / 16 capacitances (phono module replaces an HP input)
- Outputs
  - Headphones: 50 ohm
  - 2 x Tape: 250 mV / 100 O
  - PRE out RCA
- nominal: 1 V eff
- maximum 9.5V eff
- Impedance: 22 ohms
- Decoder interface with fixed level (TASI): available
Power amplifier
- Rated power per channel at 8 ohms: 100 Watts
- Both channels simultaneously at 4 ohms: 150 watts
- Pulse power at 8 Ohm s: 150 watts
- Pulse power at 4 Ohm s: 290 watts
- Power bandwidth: 1 Hz – 300 kHz
- Frequency response +0 -3 dB: 1 Hz – 400 kHz
- Rise speed: 60 V / µs
- Attenuation factor: > 500
- Noise voltage range: > 110 dB
- Total harmonic distortion: < 0.002 %
- Screening: 50000 µF
Tuner
- Reception range FM: 87.5 ... 108 MHz
- Sensitivity (at 75 ohms)
  - Mono, S/N = 26 dB: 0.9 µV
  - Stereo, S/N 0 46 dB: 28 µV
- Overload resistance: > 110 dB
- Attenuator (Local, DX): dynamic, manually switchable
- Tuner circuits , tuned: 4 x Quartz PLL, digital
- selectivity, (df = 300 kHz) N/W: 80 dB / 60 dB
- Stereo crosstalk attenuation (1 kHz): > 40 dB
- MPX filtering: 19 kHz + 38 kHz
- Frequency response (+/- 1.5 dB): 5 Hz ... 15 kHz
- total harmonic distortion 40 kHz deviation
  - Stereo Wide: < 0,10%
  - Stereo, Narrow: < 0,15 %
  - Mono Narrow: < 0,10%
- signal-to-noise distance (IEC ):
  - Mono: 79 dB
  - Stereo 72 dB
- RDS decoder: CENELEC EN 50067
- functions of RDS: station name (PS program service)
miscellaneous
- power supply: mains connection 110 V or 230 V, 50 Hz, 300 VA
- dimensions (HxWxD): 7,5 x 44 x 39 cm
- weight: 9 kg

frequency response (+0 -3 dB): 0.5 Hz – 400 kHz
debt-to-Noise ratio
high level: 7 x 104 / 109 dB
Subsonic Filter : 14 Hz
total harmonic distortion: < 0,001 %
Intermodulation < 0,001 %
channel separation > 90 dB
input sensitivity nominal
- high level: 250 mV / 20 kOhm
- Phono MM (optional) 1 – 5 mV / 16 capacity
- Phono MC (optional) 60 – 1000 µV / 16 capacity (Phono module replaces a HP input)
outputs
- headphone: 50 Ohm s
- 2 x Tape: 250 mV / 100 O
- PRE out RCA
nominal: 1 V eff
a maximum of 9.5 V eff
impedance: 22 Ohm s
Decoder interface with a fixed level (TASI): available

high level: 250 mV / 20 kOhm
Phono MM (optional) 1 – 5 mV / 16 capacity
Phono MC (optional) 60 – 1000 µV / 16 capacity (Phono module replaces a HP input)

headphone: 50 Ohm s
2 x Tape: 250 mV / 100 O
PRE out RCA

rated power per channel, 8 Ohm s: 100 watts
Both channels at the same time at 4 Ohm s: 150 watts
pulse power at 8 Ohm s: 150 watts
pulse power at 4 Ohm s: 290 watts
power bandwidth: 1 Hz – 300 kHz
frequency response +0 -3 dB: 1 Hz – 400 kHz
slew rate: 60 V / µs
damping factor: > 500
signal-to-Noise ratio: > 110 dB
total harmonic distortion: < 0,002 %
screening: 50000 µF

reception area of FM: 87.5 ... 108 MHz
Sensitivity (at 75 ohms)
- Mono, S/N = 26 dB: 0.9 µV
- Stereo, S/N 0 46 dB: 28 µV
Overload resistance: > 110 dB
Attenuator (Local, DX): dynamic, manually switchable
Tuner circuits , tuned: 4 x Quartz PLL, digital
selectivity, (df = 300 kHz) N/W: 80 dB / 60 dB
Stereo crosstalk attenuation (1 kHz): > 40 dB
MPX filtering: 19 kHz + 38 kHz
Frequency response (+/- 1.5 dB): 5 Hz ... 15 kHz
Total Harmonic Distortion 40 kHz Stroke
- Stereo Wide: < 0.10%
- Stereo Narrow: < 0.15 %
- Mono Narrow: < 0.10%
Noise Voltage Distance (IEC ):
- Mono: 79 dB
- Stereo 72 dB
RDS decoder: CENELEC EN 50067
RDS functions: Station name (PS program service)