T+A Pulsar R 2000 AC specifications

Category : Receiver

Brand : T+A

General

connectors

2x RCA to 3x RCA in/out (tape loops) 1x MM 1x MC 2x FM antenna 1x antenna

3x RCA out (Tape) 1x XLR Preout 2 Pairs of speaker terminals A/B (for banana plugs)

Technical data

power AMPLIFIER

PRECURSOR

receive level

special features

Other models from the same series:

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4s: 120 W
- 4 643961b8da111c0a15d770a1109a86d4s: 190 W
- 2 643961b8da111c0a15d770a1109a86d4s: 250 W
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s: 200 W
- 4 643961b8da111c0a15d770a1109a86d4s: 280 W
- 2 643961b8da111c0a15d770a1109a86d4s: 270 W
total harmonic distortion: 0.004% of
damping factor: >400
frequency response: +0 -3 db 4-300 KHZ

channels: Two 75643961b8da111c0a15d770a1109a86d4 inputs for cable and house connection
frequency:
- FM: 87.5 MHz - 108 MHz
- MW: 522 kHz - 1611 kHz
frequency response: +-1.5 db 10Hz - 15Khz
input sensitivity: At 75643961b8da111c0a15d770a1109a86d4 Mono 0.9 µV , Stereo 33,0 µV
total harmonic distortion: Mono/Stereo 0,1/0,2%
signal-to-noise ratio: >76/74db
channel separation:
selectivity: 70db
frequency selection:
in addition to the wave selection:
mirror frequency attenuation:
ZF-attenuation:
ON-suppression:
output level:
RDS: Yes
station memory: 100