Sony TA-F 661 R specifications

Brand : Sony

General

connectors

Technical data

number of inputs: 6
- Phono (MC) - RCA - 0,17 mV/100 Ohm s (sensitivity/impedance)
- Tuner, CD, Aux, Tape1/DAT, Tape2/MD Phono - 150 mV/50 kOhm (sensitivity/impedance)
number of outputs:
- 2x Rec out RCA 150 mV/1 kOhm (level/impedance)
- headphone Stereo Jack for headphones, low and high impedance

Phono (MC) - RCA - 0,17 mV/100 Ohm s (sensitivity/impedance)
Tuner, CD, Aux, Tape1/DAT, Tape2/MD Phono - 150 mV/50 kOhm (sensitivity/impedance)

the duration of the performance (total harmonic distortion)
- 8 Ohm : 2x 70 W (0.005%)
- 4 Ohm : 2 x 100 W (0.008%)
- 2 Ohm : 2x 140 W (0.008%)
dynamic performance
- 8 Ohm : 2 x 100 W
- 4 Ohm : 2x 150 W
- 2 Ohm s: 2x 200 W
total harmonic distortion: less than 0.008% of 10 W
damping factor: 70 (8 Ohm s, 1 kHz)
frequency response: ± 0.5 dB (Phono), 7 Hz-100 kHz (dB Tuner, CD, Aux, Dat/Tape 1,Tape 2)
signal-to-noise ratio: under 170 micro volts (noise factor)
sound-control:
- Bass: Yes (range: ± 7 dB (100 Hz), frequency: 300 Hz)
- height: Yes (range: ± 6 dB (10 kHz), frequency: 5 kHz)
Loudness: Yes
High Filter : no
Low Filter (Subsonic): Yes
Mute: no
Direct/Line-Straight: Yes
total harmonic distortion: < 0,008 %
frequency response: 7 - 100,000 Hz; +0/-3 dB
Signal-to-noise ratio: 105 dB
damping factor: 60 (8 Ohm )
the Rec Out selector (to Determine the program you want to record, while simultaneously Listening to a different signal source)
Loudness
Subsonic Filter
gold-plated headphone Jack
2 pairs of Speakers can be connected (screw terminals), separately switchable
Source Direct
Controller:
- Balance
- Bass
- height
EON Control-port
3 switched power outputs (a total of 100 watts maximum)