Sanyo Plus 55 specifications

Category : Receiver

Brand : Sanyo

General

connectors

Technical data

amplifier

Tuner

special features

inputs:
- Phono MM: 2.5 mV / 47kohms, 150 mV max.
- Tuner: 150mV/47k643961b8da111c0a15d770a1109a86d4
- Aux: 150mV/47k643961b8da111c0a15d770a1109a86d4
- Tape Play 1, 2: 150mV/47k643961b8da111c0a15d770a1109a86d4
- External Processor In: 150mV/47k643961b8da111c0a15d770a1109a86d4
Outputs:
- Tape Rec 1, 2: 150mV /47k643961b8da111c0a15d770a1109a86d4
- External Processor Out: 150mV /47kohm
- Headphones:
- 2 pairs of speakers

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 55 W (RMS , 20 - 20, 000 Hz)
- 4 643961b8da111c0a15d770a1109a86d4: 2 x 55 W (RMS , 20 - 20, 000 Hz)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0.04 to %
damping factor: 40 to 8 643961b8da111c0a15d770a1109a86d4s
frequency response:
- Phono RIAA: 20 - 20 000 Hz, ± 0.2 dB
- high level: 10 Hz - 40'000 kHz, ± 0.5 dB
signal-to-noise ratio:
- Phono MM: 75 dB
- high level: 95 dB
control:
- Bass: ± 10 dB (at 100 Hz)
- treble: ± 10 dB (at 10 kHz)
Loudness: Yes, + 10 dB at 100 Hz, + 3 dB at 10 kHz
High Filter : 8 kHz (12 dB/oct.)
Low Filter (Subsonic): 37 Hz (12 dB/oct.)
Mute:

receiving: FM/MW
frequency:
- FM: 88 - 108 MHz
- MW: 535 - 1605 KHz
input sensitivity:
- FM: 1,9 µV
- MW: 15µV
frequency response: 20 - 15 000 Hz (+0.5 dB / -1 dB)
total harmonic distortion:
- FM Mono: < 0,2% (1 kHz)
- FM Stereo: < 0,3% (1 kHz)
signal-to-noise ratio:
- FM (65 dBf): 75 dB (Mono), 70 dB (Stereo)
- MW: 55 dB
channel separation: 45 dB (1 kHz)
selectivity:
frequency selection: 1.2 dB
in addition to the wave selection: 75 dB (± 400 kHz)
mirror frequency attenuation:
- FM: 70 dB
- MW: 40 dB
ZF-loss:
- FM: 90 dB
- MW: 40 dB
ON-suppression: 55 dB