Sanyo DCX-4000 specifications
Category : Receiver
Brand : Sanyo
General
connectors
Technical data
amplifier
Tuner
special features
http://audio.mezei.fr/pages/Sanyo DCX4000L.html
- manufacturer: Sanyo
- model: DCX-4000 K, DCX-4000 L with a long shaft
- type: Receiver
- year of construction: 1974 - 1977
- Made in Japan
- color: Front silver, case walnut decor
- remote control: no
- power consumption: 125 W (max.), 18 W min.
- Dimensions: 455 x 148 x 340 mm (WxHxD)
- Weight: 9.3 kg
- Factory price approx.: 898 DM
- Number of inputs:
- Phono MM: 2.5 mV / 50 k643961b8da111c0a15d770a1109a86d4, max. 150 mV
- Microphone: 6.5mV / 10 k643961b8da111c0a15d770a1109a86d4
- AUX: 180 mV / 10 k643961b8da111c0a15d770a1109a86d4
- Tape Play 1, 2: 180 mV / 10 k643961b8da111c0a15d770a1109a86d4
- Tape Play 1 DIN: 180 mV / 10 k643961b8da111c0a15d770a1109a86d4
- Main In: 500 mV
- Antenna FM (75/300 643961b8da111c0a15d770a1109a86d4), AM
- Number of outputs:
- Tape Rec 1: 150 mV
- Tape Rec 1 DIN: 0.35mV, 35 k643961b8da111c0a15d770a1109a86d4
- Pre Out:
- Headphones (6.3mm jack, front)
- 2 pairs of speakers
- Phono MM: 2.5mV / 50 k643961b8da111c0a15d770a1109a86d4, max. 150 mV
- microphone: 6,5 mV / 10 k643961b8da111c0a15d770a1109a86d4
- AUX: 180 mV / 10 k643961b8da111c0a15d770a1109a86d4
- Tape Play 1, 2: 180 mV / 10 k643961b8da111c0a15d770a1109a86d4
- Tape Play 1 DIN: 180 mV / 10 k643961b8da111c0a15d770a1109a86d4
- Main In: 500 mV
- antenna FM (75/300 643961b8da111c0a15d770a1109a86d4), ON
- Tape Rec 1: 150 mV
- Tape Rec 1 DIN: 0,35 mV, 35 k643961b8da111c0a15d770a1109a86d4
- Pre Out:
- headphone (6.3 mm Jack, front)
- 2 pairs of Speakers
- continuous power
- 8 643961b8da111c0a15d770a1109a86d4: 2x 18 W
- 4 643961b8da111c0a15d770a1109a86d4:
- dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 55 W
- 4 643961b8da111c0a15d770a1109a86d4s: 75 W
- total harmonic distortion: 0.1 %
- damping factor: 30 (8 643961b8da111c0a15d770a1109a86d4)
- frequency response:
- Phono RIAA: 20 - 20 000 Hz, ± 0.2 dB
- High Level: 20 - 50'000 Hz, ± 1.5 dB
- signal-to-noise ratio:
- Phono MM: 60 dB
- microphone: 70 dB
- AUX, Tape: 80 dB
- sound-control:
- Bass: ± 10 dB (100 Hz)
- treble: ± 10 dB (10 kHz)
- Loudness: + 10 dB at 100 Hz, + 6 dB at 10 kHz
- High Filter :
- Low Filter (Subsonic):
- Muting:
- 8 643961b8da111c0a15d770a1109a86d4: 2x 18 W
- 4 643961b8da111c0a15d770a1109a86d4:
- 8 643961b8da111c0a15d770a1109a86d4: 55 W
- 4 643961b8da111c0a15d770a1109a86d4s: 75 W
- Phono RIAA: 20 - 20 000 Hz, ± 0.2 dB
- High Level: 20 - 50'000 Hz, ± 1.5 dB
- Phono MM: 60 dB
- microphone: 70 dB
- AUX, Tape: 80 dB
- Bass: ± 10 dB (100 Hz)
- treble: ± 10 dB (10 kHz)
- receiving: FM, MW
- frequency:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
- frequency response: 30 - 15,000 Hz ± 3 dB
- input sensitivity:
- FM: 2,3 µV (IHF)
- MW: 25 µV
- total harmonic distortion:
- FM: 0,5 % (Mono), 0,8 % (Stereo),
- signal-to-noise ratio:
- FM: 70 dB (Mono), 65 dB (Stereo)
- MW: 50 dB
- channel separation:
- selectivity:
- frequency selection:
- in addition to the wave selection:
- mirror frequency attenuation:
- ZF-loss:
- ON-suppression: 60 dB
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
- FM: 2,3 µV (IHF)
- MW: 25 µV
- FM: 0,5 % (Mono), 0,8 % (Stereo),
- FM: 70 dB (Mono), 65 dB (Stereo)
- MW: 50 dB
- microphone Mixer
- FM Muting
- Tape Dubbing
- Other models from the same series:
- Sanyo DCX-1000
- Sanyo DCX-2000
- Sanyo DCX-4000
- Sanyo DCX-6000
- Sanyo DCX-8000
- extract from the prospectus: Sanyo DCX-4000 K
Comment:
Comment box:
Sanyo DCX-4000 relate