Sanyo DCA-1100 specifications

Category : Integrated amplifier

Brand : Sanyo

General

Connections

Technical data

Special equipment

  • Manufacturer: Sanyo
  • Model: DCA-1100
  • Type: Integrated Amplifier
  • Years of construction: 1973 - 1976
  • Manufactured in: Japan
  • Color: Silver
  • Remote control: -
  • Power consumption: 310 W max.
  • Dimensions: 420 x 130 x 330 mm (WxHxD)
  • Weight: 10 kg
  • Factory price approx.: 1'495 DM
  • Number of inputs:
    • Input sensitivity:
    • Phono MM 1: 2.5mV, 50 kOhm , max. 200 mV
    • Phono MM 2: 2.5mV, switchable 30 kOhm , 50 kOhm , 100 kOhm , max. 200 mV
    • Microphone: 3 mV, 50 kOhm
    • Tuner: 100 mV, 100 kOhm
    • AUX 1, 2: 100 mV, 100 kOhm
    • Tape Play A, B: 110 mV, 100 kOhm
  • Number of Outputs:
    • Outputs:
    • Tape Rec 1, 2: 100 mV, 100 ohm
    • Tape Rec 1, 2 DIN: 20 mV, 20 kOhm
    • Headphones:
    • Connectors for 2 pairs of speakers
  • Input sensitivity:
  • Phono MM 1: 2.5mV, 50 kOhm , max . 200 mV
  • Phono MM 2: 2.5mV, switchable 30 kOhm , 50 kOhm , 100 kOhm , max. 200 mV
  • microphone: 3 mV, 50 kOhm s
  • Tuner: 100 mV, 100 kOhm
  • AUX 1, 2: 100 mV, 100 kOhm
  • Tape Play A, B: 110 mV, 100 kOhm
  • outputs:
  • Tape Rec 1, 2: 100 mV, 100 Ohm s
  • Tape Rec 1, 2 DIN: 20 mV 20 kOhm
  • headset:
  • connections for 2 pairs of Speakers
  • the duration of the performance (total harmonic distortion)
    • 8 Ohm : 2x 56 W (RMS , 20 Hz - 20 kHz, 0,5 %)
    • 4 Ohm : 2x 70 W
  • dynamic performance
    • 8 Ohm s: 170 W
    • 4 Ohm s: 250 W
  • total harmonic distortion: 0,5 % at 8 Ohm s
  • damping factor: 40 to 8 Ohm s
  • frequency response: 10 - 80'000 Hz, ± 3 dB
  • signal-to-noise ratio:
    • Phono: 76dB (MM)
    • Tuner: 90dB
    • AUX: 90dB
    • Tape Play: 90dB
  • tone control
    • Bass: ± 10 dB at 100 Hz
    • height: ± 10 dB at 10 kHz
  • Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz
  • High Filter : 12 dB/octave at 10 kHz
  • Low Filter : 12 dB/octave at 40 Hz
  • attenuator: 0 dB, - 20 dB
  • 8 Ohm : 2x 56 W (RMS , 20 Hz - 20 kHz, 0,5 %)
  • 4 Ohm : 2x 70 W
  • 8 Ohm s: 170 W
  • 4 Ohm s: 250 W
  • Phono: 76dB (MM)
  • Tuner: 90dB
  • AUX: 90dB
  • Tape Play: 90dB
  • Bass: ± 10 dB at 100 Hz
  • height: ± 10 dB at 10 kHz
  • Mono / Stereo switch
  • 2 microphone inputs on the front page
  • Tuner from the same series:
  • Sanyo FMT FMT 200 K
  • Sanyo -250 K
  • Sanyo FMT FMT 450 K
  • Sanyo 1100 K
  • Sanyo FMT FMT 1200 K
  • Sanyo -1300 K
  • Sanyo FMT-1400 K
  • Excerpt from the prospectus: Sanyo Kombi DCA-1100 / FMT-1100 K

Sanyo DCA-1100


Comment:



Comment box:


Sanyo DCA-1100 relate