Sansui AU-D 11 specifications
Category : Integrated amplifier
Brand : Sansui
General
Connections
Technical data
Special equipment
- Manufacturer: Sansui
- Model: AU-D11
- Type : Integrated amplifier
- Years of construction: 1980 - 1982
- Manufactured in: Japan
- Color: Black
- Remote control:
- Power consumption: 600 W max.
- Dimensions (WxHxD): 445 x 155 x 443 mm
- Weight: 17.5 kg
- Factory price approx.: 2.598,- DM
- Number of inputs:
- Phono 1, 2 MM: 2.5 mV, 47 kOhm , 200 mV max.
- Phono 1, 2 MC: 0.1mV or 0.2mV, 100 ohm, 16 mV max.
- Tuner: 250 mV, 27 kOhm
- Aux 1, 2: 250 mV, 27 kOhm
- Tape Play 1, 2: 250 mV, 27 kOhm
- Tape Play 2 DIN:
- Number of Outputs:
- Tape Deck 1, 2 Rec: 250 mV, 47 kOhm
- Tape Deck 2 Rec/Play DIN: 30 mV
- Headphones:
- 2 pairs of speakers
- Phono 1, 2 MM: 2.5mV, 47 kOhm , 200 mV max.
- Phono 1, 2 MC: 0.1mV or 0.2mV, 100 ohm, 16 mV max.
- Tuner: 250 mV, 27 kOhm
- Aux 1, 2: 250 mV, 27 kOhm
- Tape Play 1, 2: 250 mV, 27 kOhm
- Tape Play 2 DIN:
- Tape Deck 1, 2 Rec: 250 mV, 47 kOhm
- Tape Deck 2 Rec/Play DIN: 30 mV
- Headphones:
- 2 pairs of speakers
- Continuous power (with total harmonic distortion)
- 8 Ohm s: 2x 120 W RMS at <0.005 % Total harmonic distortion
- 4 ohms:
- Dynamic power
- Total harmonic distortion:
- Attenuation factor: 150 (8 Ohm )
- Frequency response: 0 Hz ... 300 kHz (-3 dB)
- Signal-to-noise ratio:
- Phono MM 90 dB
- Phono MC 74 dB
- High level 110 dB
- Tone control:
- Bass: ± 8 dB at 50 Hz
- Treble: ± 8 dB at 15 kHz
- Loudness:
- High Filter : Yes
- Low Filter (Subsonic): Yes
- Mute: Yes
- Direct/Line-Straight:
- 8 Ohm s: 2x 120 W RMS at <0.005 % distortion
- 4 Ohm s:
- Phono MM 90 dB
- Phono MC 74 dB
- High level 110 dB
- Bass: ± 8 dB at 50 Hz
- Treble: ±8 dB at 15 kHz< /li>
- Liquid-cooled power amplifier
- Phono MM/MC
- High/Low Level Phono
- Picture: Sansui AU-D11
- Device presentation at good-old-hifi: [1]
Comment:
Comment box:
Sansui AU-D 11 relate