Rotel RCX-860 specifications
Category : Total facilities
Brand : Rotel
General
Note:Usually offered as a complete package ,,System 860", with rack RK-150, turntable RP-860 and speakers RL-860.
Connections
Tech nical data
Radio FM (FM)
Radio AM (medium wave (if necessary, long-))
Cassette recorder
Amplifier
Special equipment
Other models of the Stan-Curtis series:
- Manufacturer: Rotel
- back to Rotel Combi-devices
- Model: RCX-860 (L)
- Design: Stan Curtis
- Years of construction: 1982 - 1984
- Made in: Taiwan
- Color: silver
- Remote control: RRT-2
- Power consumption: 250W
- Dimensions (WxHxD):
- RCX-860: 430 x 230 x 320mm< /li>
- RRT-2: 75 x 175 x 25mm
- Weight:
- RCX-860: 11.9kg
- RRT-2: 185g
- Unit price RCX-860: unknown
- Factory price ,,System 860": 1200,- DM 1982
- RCX-860: 430 x 230 x 320mm
- RRT-2: 75 x 175 x 25mm
RCX-860: 11.9kg - RRT-2: 185g
- Number of the inputs: 4
- Phono MM: 2.7mV / 47kOhm
- Ext. Tape in: 150mV/50kOhm
- Microphone R+L: 40mV /10kOhm
- Antenna: FM 75 + 600 Ohm , AM
- Number of outputs: 5
- Speaker: 2 pairs, separately switchable, 4 - 16 ohm
- Headphones: 1x 4 - 16 Ohm
- Ext. Tape out: 330mV / 2.2kOhm
- switched power socket e.g. for turntables
- Phono MM: 2.7mV/47kOhm
- Ext. Tape in: 150mV / 50kOhm
- Microphone R+L: 40mV /10kOhm
- Antenna: FM 75 + 600 Ohm , AM
- Speaker: 2 pairs, separately switchable, 4 - 16 ohm
- Headphones: 1x 4 - 16 Ohm
- Ext. Tape out: 330mV / 2.2kOhm
- switched power socket e.g. for record player
- frequency: 88 - 108 MHz
- input sensitivity (Mono): 10,8 dBf/1,9 µV
- minimum sensitivity 50dB SNR:
- Mono: 18,4 dBf 4.6 µV
- Stereo: 38,2 dBf in 45µV
- signal-to-noise ratio (SNR) at 65dBf: Mono: 70 dB / Stereo: 65dB
- total harmonic distortion (THD) at 65dBf: (Mono/Stereo)
- 100Hz: 0,2% / 0,3%
- 1kHz: 0,4% / 0,4%
- 6kHz range: 0.6% / 0.6% in
- frequency response: 30Hz - 15kHz -2,0/+0.0 dB
- reception ratio: 1.5 dB
- adjacent channel suppression: 62dB at +/-400kHz
- interference suppression: 60dB
- mirror frequency attenuation: 40dB
- if rejection: 90dB
- ON-attenuation: 50dB
- channel separation in Stereo:
- 100Hz: 40dB
- 1kHz: 43dB
- 10kHz: 30dB
- pilot Tone loss: 55dB
- SCA-loss: 60dB
- Mono: 18,4 dBf 4.6 µV
- Stereo: 38,2 dBf in 45µV
- 100Hz: 0,2% / 0,3%
- 1kHz: 0,4% / 0,4%
- 6kHz range: 0.6% / 0.6% in
- 100Hz: 40dB
- 1kHz: 43dB
- 10kHz: 30dB
- frequencies: 535 - 1605 kHz
- sensitivity: 300µV/m (860L = 800µV)
- separation: 25dB
- Signal-to-noise ratio: 40dB (860L = 32dB)
- mirror frequency attenuation: 35dB (860L=58dB)
- ZF-loss: 30dB (860L = 50dB)
- built-in ferrite antenna
- heads:
- recording/playback: High-B Permalloy type
- erase head: ferrite core
- motors: 1
- flutter: 0.15% of DIN, 0,048% Wrms
- tape type: Normal, Chrome, metal
- distortion with 0dB=580mV at 400Hz (Metal): 1,2%
- frequency response gain -20dB:
- Normal LH: 50Hz - 15kHz, +/-3dB
- Special: 50Hz - 15kHz, +/-3dB
- Metal: 50Hz - 16kHz, +/-3dB
- Signal-to-noise ratio: WTD 0dB=580mV chrome):
- Dolby NR: 68dB
- Dolby off: 60dB
- input sensitivity and impedance:
- Mic: 400µV 10kOhm
- Line: 40mV 17kOhm
- rewind Time C-60: 100s
- band places switching Bias/EQ:
- Normal: 100% 120µs
- Special: 130% 70µs
- Metal: 200% 70µs
- MPX-Filter : Yes
- Dolby: No
- recording/playback: High-B Permalloy type
- erase head: ferrite core
- Normal LH: 50Hz - 15kHz, +/-3dB
- Special: 50Hz - 15kHz, +/-3dB
- Metal: 50Hz - 16kHz, +/-3dB
- Dolby NR: 68dB
- Dolby off: 60dB
- Mic: 400µV 10kOhm
- Line: 40mV 17kOhm
- Normal: 100% 120µs
- Special: 130% 70µs
- Metal: 200% 70µs
- rated power 20Hz - 20kHz, according IHF-a:
- 8 Ohm : 40W at <0.03% THD
- 4 Ohm : 80W at <0.03% THD
- continuous output a 1kHz sine in accordance with DIN:
- 8 Ohm : 30W 1% THD
- 4 Ohm s: 60W 1% THD
- total harmonic distortion IHF-a: <0,06%
- damping factor: 25 at 1kHz into 8 Ohm s
- inter-modulation (TIM): <0,06%
- frequency response IHF-a:
- Phono: 30Hz - 15kHz +/ - 0.5 dB RIAA-Standard
- Amp min.: 20Hz - 20kHz +/-1.5dB
- Signal-to-noise ratio according to IHF-a:
- Tone control:
- Bass: +/- 10dB at 100Hz
- Treble: +/- 10dB at 10kHz
< /ul>
- Loudness:
- +10dB at 100Hz and +4dB at 10kHz
- at volume on -40dB
8 Ohm : 40W at <0.03% THD 4 Ohm : 80W at <0.03% THD- 8 Ohm : 30W at 1% THD
- 4 Ohm : 60W at 1% THD
- Phono: 30Hz - 15kHz +/-0.5dB RIAA standard
- Amp min.: 20Hz - 20kHz +/-1.5dB
- Bass: +/- 10dB at 100Hz
- Treble: +/- 10dB at 10kHz
- +10dB at 100Hz and +4dB at 10kHz
- at volume up to -40dB
- Muting: switchable
- Memory Play (tape section repetition)
RP-860 RP-840 RP-820RD-840 RD-820 - User Manual Rotel RCX-860 (L)
- Homepage Stan Curtis
- Homepage Rotel
Comment:
Comment box:
Rotel RCX-860 relate