Rotel RA-413 specifications

Category : Integrated amplifier

Brand : Rotel

General

Connections

Technical data

Other devices in this series:

  • Manufacturer: Rotel
  • back to Rotel Integrated amplifier
  • Model: RA-413
  • Predecessor: RA- 412
  • Successor: RA-414
  • Years of construction: 1977 - 1978
  • Manufactured in: Taiwan
  • Color: silver
  • Power consumption: 260W
  • Dimensions (WxHxD): 430 x 140 x 260mm
  • Weight: 8.8kg
  • Factory price: unknown
  • Inputs: Sensitivity and Impedance:
    • Phono Mag: 2.5mV 45k643961b8da111c0a15d770a1109a86d4
    • Phono Cer: 150mV 240k643961b8da111c0a15d770a1109a86d4
    • Tuner/Tape/Aux: 150mV 40k643961b8da111c0a15d770a1109a86d4
  • Phono Mag: 2.5mV 45k643961b8da111c0a15d770a1109a86d4
  • Phono Ce: 150mV 240k643961b8da111c0a15d770a1109a86d4
  • Tuner/Tape/Aux: 150mV 40k643961b8da111c0a15d770a1109a86d4
  • Outputs: Output voltage and impedance:
    • Tape out:
      • RCA: 300mV 1k643961b8da111c0a15d770a1109a86d4
      • DIN: 100mV 90k643961b8da111c0a15d770a1109a86d4
    • Speaker: 2 pairs 4 - 16 643961b8da111c0a15d770a1109a86d4
      • switchable separately
    • Headphones: 4 - 16 643961b8da111c0a15d770a1109a86d4
  • Tape out:
    • RCA: 300mV 1k643961b8da111c0a15d770a1109a86d4
    • DIN : 100mV 90k643961b8da111c0a15d770a1109a86d4
  • Speaker: 2 pairs 4 - 16 ohm
    • switchable separately
  • Headphones: 4 - 16 ohm
  • RCA: 300mV 1k643961b8da111c0a15d770a1109a86d4
  • DIN: 100mV 90k643961b8da111c0a15d770a1109a86d4
  • can be switched separately
  • Continuous power 20Hz - 20kHz according to IHF-a:
    • 8 643961b8da111c0a15d770a1109a86d4: 35W at <0.2% THD
    • 4 643961b8da111c0a15d770a1109a86d4: 42W at <0.2% THD
  • Total harmonic distortion IHF-a: < 0,2%
  • Attenuation factor: 32 at 1kHz at 8 ohms
  • Intermodulations (TIM): <0,5%
    • 60Hz : 7kHz = 4 : 1
  • Input voltage max. at 0.5% THD and 1kHz:
    • Phono Mag: 110mV
    • all others: >5V
  • Frequency response IHF-a:
    • Phono: 30Hz - 15kHz +/-0.5dB RIAA standard
    • all others: 10Hz - 50kHz +/-1.0dB
  • Signal-to-noise ratio according to IHF-a:
    • Phono Mag: 72dB
    • all others: 90dB
  • Noise filter: -6dB 10kHz
  • Rumble filter: -6dB 100Hz
  • Tone control:
    • Bass: +/ - 10dB at 100Hz
    • Treble: +/-10dB at 10kHz
  • Loudness: switchable
    • +7dB at 100Hz and +4dB at 10kHz
    • at volume up to -40dB
  • 8 643961b8da111c0a15d770a1109a86d4: 35W at <0,2% THD
  • 4 643961b8da111c0a15d770a1109a86d4: 42W at <0,2% THD
  • 60Hz : 7kHz = 4 : 1
  • Phono Mag: 110mV
  • all others: >5V
  • Phono: 30Hz - 15kHz +/-0.5dB RIAA standard
  • all others: 10Hz - 50kHz +/-1.0dB
  • Phono Mag: 72dB
  • all others: 90dB
  • Bass: +/-10dB at 100Hz
  • Treble: +/- 10dB at 10kHz