Rotel RA-1210 specifications
Category : Integrated amplifier
Brand : Rotel
General
Connections
Technical data
Special equipment
User manual Rotel RA-12 10 Homepage 871d4655faf3e755b822dbb3a7e10b1d
- Manufacturer: 871d4655faf3e755b822dbb3a7e10b1d
- back to 871d4655faf3e755b822dbb3a7e10b1d Integrated amplifier
- Model: RA-1210
- Successor: RA-1212
- Type: Stereo Class A/B Integrated Amplifier
- Years of construction: 1973 - 1976
- Manufactured in: Japan
- Color: Silver, Wooden case
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 420 x 140 x 304 mm
- Weight: 13.7kg
- Factory price approx.: 978 DM
- Number of inputs:
- Phono MM 1: 1 mV, 100 kOhm
- Phono MM 2: switchable 1 mV, 2 mV, 4 mV, switchable 10 kOhm , 50 kOhm . 100 kOhm
- Aux 1, 2: 180 mV, 50 kOhm , max. 15 V
- Tape Play 1, 2: 180 mV, 50 kOhm , max. 15 V
- Main In: 1.5V, 50 kOhm
- Number of Outputs:
- Tape Rec 1, 2: 350 mV, 3.3kOhm
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
- Phono MM 1: 1 mV, 100 kOhm
- Phono MM 2: switchable 1 mV, 2 mV, 4 mV, switchable 10 kOhm , 50 kOhm . 100 kOhm
- Aux 1, 2: 180 mV, 50 kOhm , max. 15 V
- Tape Play 1, 2: 180 mV, 50 kOhm , max. 15 V
- Main: 1.5 V, 50 kOhm
- Tape Rec 1, 2: 350 mV, 3,3 kOhm
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- headphone:
- 2 pairs of Speakers
- the duration of the performance (total harmonic distortion)
- 8 Ohm : 2x 60 watts (20 Hz - 20,000 Hz)
- 4 Ohm : 2x 80 watts (1 kHz)
- dynamic performance
- 8 Ohm : 2x 80 watts
- 4 Ohm : 2x 110 watts
- frequency response: 3 Hz - 50 kHz, - 3 dB
- total harmonic distortion: < 0,1 %
- damping factor: 35 at 8 Ohm s
- signal-to-noise ratio:
- Phono MM: 70 dB
- high level: 80 dB
- tone control
- Bass: ± 10 dB at 100 Hz
- use frequencies: 200 Hz, 400 Hz
- treble: ± 10 dB at 10 kHz
- use of frequencies: 2 kHz, 4 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter : 12 dB / octave at 8 kHz
- Low Filter (Subsonic): - 12 dB / octave at 30 Hz
- Muting: 0 dB, - 20 dB
- 8 Ohm : 2x 60 watts (20 Hz - 20,000 Hz)
- 4 Ohm : 2x 80 watts (1 kHz)
- 8 Ohm : 2x 80 watts
- 4 Ohm : 2x 110 watts
- Phono MM: 70 dB
- high level: 80 dB
- Bass: ± 10 dB at 100 Hz
- use frequencies: 200 Hz, 400 Hz
- treble: ± 10 dB at 10 kHz
- use of frequencies: 2 kHz, 4 kHz
- use frequencies: 200 Hz, 400 Hz
- use of frequencies: 2 kHz, 4 kHz
- dual-Mono power supplies for the power amplifiers
- Tape Dubbing
- Other Receiver of the same series:
- amplifier of the same series:
- Tuner from the same series:
- headphones of the same series:
- Device performance in good-old-hifi: [1]
Comment:
Comment box:
Rotel RA-1210 relate