Pioneer SX-1000 TA specifications

General

Connections

Technical data

Amplifiers

Technical data

Special equipment

There were various versions between 1966 and about 1969 and depending on the market: The original model was the Pioneer SX- 1000 T from 1967 (in Japan already from 1966?), later there were TA, TD and TW which were similar. TD and TW could be the same model for different markets (US etc.). The TA Model supposedly has Nuvistor tubes in the tuner section.

Previous model:

Successor model:

Manufacturer: Pioneer
Model: SX-1000 TA
Years of construction: 1968 - 1969
Made in: Japan
Color: Silver with wooden case
Power consumption: 175 watts (max.)
dimensions (WxHxD): 405 x 137 x 350 mm
approx weight: 13.3 kg
factory price approx.: 360 US$ (USA, 1966), 1'490 DM

number of inputs: 7
- 2x Phono MM: 2.5 mV, 50 k643961b8da111c0a15d770a1109a86d4s
- Phono ceramic: 55 mV, 90 k643961b8da111c0a15d770a1109a86d4
- Tape: 200 mV, 200 k643961b8da111c0a15d770a1109a86d4 (RCA or DIN)
- Aux: 200 mV, 200 k643961b8da111c0a15d770a1109a86d4
- Tape Head: 1.5 mV, 120 k643961b8da111c0a15d770a1109a86d4
- FM antenna 300 643961b8da111c0a15d770a1109a86d4 (2 screw
- MW antenna (2 screw terminals))
number of outputs: 3
- Tape Monitor (RCA or DIN)
- headphone (6.3 mm Jack)
- 1 pair of speakers 8-16 643961b8da111c0a15d770a1109a86d4 (Pioneer Adapter required)

2x Phono MM: 2.5 mV, 50 k643961b8da111c0a15d770a1109a86d4s
Phono ceramic: 55 mV, 90 k643961b8da111c0a15d770a1109a86d4
Tape: 200 mV, 200 k643961b8da111c0a15d770a1109a86d4 (RCA or DIN)
Aux: 200 mV, 200 k643961b8da111c0a15d770a1109a86d4
Tape Head: 1.5 mV, 120 k643961b8da111c0a15d770a1109a86d4
FM antenna 300 643961b8da111c0a15d770a1109a86d4 (2 screw terminals)
MW antenna (2 screw terminals)

Tape Monitor (RCA or DIN)
headphone (6.3 mm Jack)
1 pair of speakers 8-16 643961b8da111c0a15d770a1109a86d4 (Pioneer Adapter required)

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 40 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 50 W
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 90 W
- 4 643961b8da111c0a15d770a1109a86d4s: 120 W
total harmonic distortion: < 0,5% (1 kHz)
damping factor: 30 (8 643961b8da111c0a15d770a1109a86d4)
power range: 15 - 40 000 Hz (IHF)
frequency response: 20 - 60'000 Hz, ± 1 dB
signal-to-noise ratio:
- Phono MM: > 70 dB
- Tape Head: > 60 dB
- High Level: > 85 dB
stereo channel separation:
sound-control:
- Bass: -14/ +13 dB (50 Hz)
- height: -12/ +10 dB (10 kHz)
Loudness: +13 dB (50 kHz), +9 dB (10 kHz)
High Filter : -11 dB (10 kHz)
Low Filter (Subsonic): -9 dB (50 Hz)
Muting: - 40 dB

8 643961b8da111c0a15d770a1109a86d4: 2x 40 W
4 643961b8da111c0a15d770a1109a86d4: 2x 50 W

8 643961b8da111c0a15d770a1109a86d4s: 90 W
4 643961b8da111c0a15d770a1109a86d4s: 120 W

Phono MM: > 70 dB
Tape Head: > 60 dB
High Level: > 85 dB

Bass: -14/ +13 dB (50 Hz)
height: -12/ +10 dB (10 kHz)

receiving: FM/MW
frequency:
- FM: 87 - 108 MHz
- MW: 535 - 1605 KHz
input sensitivity:
- FM: 2,2 µV
- MW: 18µV
frequency response:
THD:
signal-to-noise ratio: 60 dB
channel separation: 38 dB (1 kHz)
selectivity:
frequency selection:
in addition to the wave selection:
mirror frequency attenuation: 55 dB
ZF-attenuation:
ON-suppression:

FM: 87 - 108 MHz
MW: 535 - 1605 KHz

FM: 2,2 µV
MW: 18µV

tone control (Bass and treble) for the left and Right can be adjusted separately
Filter for noise (treble) and rumble (Bass)
Electronic circuit protection
Tape Monitor, switchable
tape head connection with NAB equalization. Two speeds (9.5 and 19 cm) selectable
FM AFC
Adjustment screw for FM stereo channel separation (on the back of the device)
2 phono inputs (ceramic/ Magnetic or magnetic) switchable
Speaker switch (on/ off)