Pioneer SX-1000 TD specifications

General

Connections

Technical data

Amplifier

Tuner / Receiver

Special equipment

There were various versions between 1966 and about 1969 and depending on the market: the original model was the Pioneer SX-1000 T from 1967 (in Japan already from 1966?), later there were TA, TD and TW which were similar. TD and TW could be the same model for different markets (US etc.).

Manufacturer: Pioneer
Model: SX-1000 TD
Years of construction: 1968 - 1969
Manufactured in: Japan
Color: Silver. Optionally with wooden housing
Power consumption: 200 watts (max.)
dimensions (WxHxD): 402 x 139 x 347 mm
weight: 10.6 Kg/ 13.3 kg
factory price approx.: 1'662 DM (1969)

number of inputs: 7
- 2x Phono MM: 2.4 mV, 50 k643961b8da111c0a15d770a1109a86d4s
- 1x Phono crystal: 51 mV, 90 k643961b8da111c0a15d770a1109a86d4
- Aux: 200 mV, 100 k643961b8da111c0a15d770a1109a86d4
- Tape Head: 1.5 mV, 120 k643961b8da111c0a15d770a1109a86d4 (RCA or DIN)
- FM antenna 300 643961b8da111c0a15d770a1109a86d4 (2 screw terminals)
- MW antenna (2 screw terminals)
number of outputs:
- Tape: 130 mV (RCA or DIN)
- headphone (6.3 mm Jack)
- 2 pairs of Speakers (4-16 643961b8da111c0a15d770a1109a86d4s)

2x Phono MM: 2.4 mV, 50 k643961b8da111c0a15d770a1109a86d4s
1x Phono crystal: 51 mV, 90 k643961b8da111c0a15d770a1109a86d4
Aux: 200 mV, 100 k643961b8da111c0a15d770a1109a86d4
Tape Head: 1.5 mV, 120 k643961b8da111c0a15d770a1109a86d4 (RCA or DIN)
FM antenna 300 643961b8da111c0a15d770a1109a86d4 (2 screw terminals)
MW antenna (2 screw terminals)

Tape: 130 mV (RCA or DIN)
headphone (6.3 mm Jack)
2 pairs of Speakers (4-16 643961b8da111c0a15d770a1109a86d4s)

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 50 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 55 W
dynamic power (both channels according to IHF)
- 8 643961b8da111c0a15d770a1109a86d4s: 120 W
- 4 643961b8da111c0a15d770a1109a86d4: 130 W
total harmonic distortion: < 0,5 % (1 kHz)
damping factor: 25 at 8 643961b8da111c0a15d770a1109a86d4 (1 kHz)
power range: 15 - 50 000 Hz (Aux)
frequency response: 20 - 50,000 Hz (± 1 dB)
signal-to-noise ratio:
- Phono MM: gt&; 80 dB
- Tape Head: > 75 dB
- High Level: > 90 dB
stereo channel separation:
control:
- Bass: -14/ +12 dB (50 Hz)
- treble sound: -11,5/ +10 dB (10 kHz)
Loudness: +12 dB (50 kHz), +6.5 dB (10 kHz)
High Filter : -10 dB (10 kHz)
Low Filter (Subsonic): -6 dB (50 Hz)
Muting: - 40 dB

8 643961b8da111c0a15d770a1109a86d4: 2x 50 W
4 643961b8da111c0a15d770a1109a86d4: 2x 55 W

8 643961b8da111c0a15d770a1109a86d4s: 120 W
4 643961b8da111c0a15d770a1109a86d4s: 130 W

Phono MM: > 80 dB
Tape Head: > 75 dB
High Level: > 90 dB

Bass: -14/ +12 dB (50 Hz)
height: -11,5/ +10 dB (10 kHz)

receiving: FM/ MW
frequency:
- FM: 87 - 108 MHz
- MW: 535 - 1605 KHz
input sensitivity:
- FM: 1,7 µV
- MW: 20µV
frequency response:
THD:
signal-to-noise ratio: 65 dB (IHF)
channel separation: 37 dB (at 1 kHz)
selectivity:
frequency selection: 1 dB (at 98 Mhz)
in addition to the wave selection:
mirror frequency attenuation: 76 dB (at 98 Mhz)
ZF-attenuation:
ON-suppression:

FM: 87 - 108 MHz
MW: 535 - 1605 KHz

FM: 1,7 µV
MW: 20µV

tone control (Bass and treble) for the left and Right
Filter for noise (treble) separately adjustable and rumble (Bass)
Electronic circuit protection
Tape Monitor, switchable
tape head connection with NAB equalization. Two speeds (9.5 and 19 cm) selectable
FM AFC
Adjustment screw for FM stereo channel separation (on the back of the device)
2 phono inputs (ceramic/ Magnetic or magnetic) switchable
2 speaker pairs connectable
Combination switch (on/off, speaker (LS) Main, LS Remote, LS Main + Remote, LS Off)