Onkyo TA-2051 specifications

Category : Cassette decks

Brand : Onkyo

Onkyo Stereo Cassette Deck TA-2051

General :

Audio outputs/ Inputs:

Tech nical data:

Special equipment:

• Brand : Onkyo
• Model : TA-2051
• Power supply: 230 V/50 Hz
• Power consumption: 13 watts
• Dimensions: 455 (W) x 120 (H) x 310 (T) mm
• Weight: 5.0 kg
• Sold from 1993-1995
• Approximate purchase price: 750 DM (1993), 700 DM (11/1994)

• Output jacks: 3
  • Headphone jack,rec. Termination impedance: 8 to 200 ohm (not adjustable)
  • Stereo L/R RCA Line Out,nominal output level: 500 mV (0dB), Rec. Termination impedance: about 50kOhm
  • Onkyo RI system jack 3.5mm

• Headphone jack,rec. Termination impedance: 8 to 200 ohm (not adjustable)
• Stereo L/R RCA Line Out,nominal output level: 500 mV (0dB), Rec. Termination impedance: over 50kOhm
• Onkyo RI system jack 3.5mm

• Input jacks: 2
  • Line In: Stereo L/R RCA, input sensitivity: 80 mV, Input impedance: 50 kOhm
  • Onkyo RI system Jack 3.5mm
< /ul>
• Line In: Stereo L/R RCA, Input sensitivity: 80 mV, Input impedance: 50 kOhm
• Onkyo RI system jack 3.5mm
• Head assembly:3
• Motors:3
• Synchronisation fluctuations: 0.045 % (WRMS ) 0,09 % (DIN)
• Frequency response:
  • Normal: 20Hz-18KHz (±3dB from 30Hz -17kHz)
  • High: 20Hz-19kHz (±3dB from 30Hz-18KHz)
  • Metal: 20Hz-20kHz (±3dB from 30Hz-l9kHz)
• Noise voltage range:
  • 60 dB (pure iron, without Dolby)
  • With Dolby B improvement by 10 dB over 5 kHz and 5 dB at 1 kHz.
  • With Dolby C improvement by 20 dB at 5 kHz
• Normal: 20 Hz -18 kHz (±3 dB from 30 Hz - 17 kHz)
• High: 20 Hz-19 kHz (±3 dB from 30 Hz-18KHz)
• Metal: 20 Hz-20 kHz (±3 dB from 30 Hz- l9kHz)
• 60 dB (pure iron, without Dolby)
• With Dolby B improvement by 10 dB over 5 kHz and 5 dB at 1 kHz.
• With Dolby C improvement by 20 dB at 5 kHz
• Three-motor drive
• Dual -capstan drive with closed tape loop
• BIAS fine adjustment (pre-magnetization, called accubias)
• Reinforced chassis
• Reinforced cassette holder
• Low-noise drive with Microprocessor control
• AEI transformer
• Dolby HX Pro and Dolby B/C NR
• Switchable MPX filter
• Real-time tape counter and linear counter
• Automatic monitor (for backband control)
• Repeat functions (whole page/any section)
• Jump function for both tape directions
< li>Large fluorescent display with two 13-segment peak value meters
• Peak hold (peak value hold function) for precise level control
• The front is also made of metal
• Suitable for Ri system remote control, there even with a CD player remote control with Soft CD-Pl./ Tape controllable
• Striking external similarity and extensive structural similarity with the later TA-6510, but the TA-2051 is from 1993. The BdA is also the same (!), although only in German for the TA-2051, in three languages for the TA-6510.
• Like all onkyos of this time, the device still has the old Onkyo dimension with a width of 45.5 cm. The corners at the front are made of plastic, the front is made of metal.
• Other models of the same series:
  • TA-2031
  • TA-2051
• TA-2031
• TA-2051

• Stereoplay 11/1993: Top class II (very good), sounded very good , Workmanship good. "Very good dynamics ... highly controllable" (p.50)
• Hifi Vision 12/93: Good to very good, sound good, workmanship very good.
• Stereo 11/94: good, 1 star. "Plus: Durable, low noise and pleasant sounding, processed with great attention to detail. Minus: "limited calibration possibility, no clock start.“ (p.50)
• Reviews of the TA-6510 - see there.

Comment:

Comment box:

Onkyo TA-2051 relate

Onkyo TA-2055

Onkyo TA-2056

Onkyo TA-2058

Onkyo TA-2060

Onkyo TA-2066

Onkyo TA-2070

Onkyo TA-2080

Onkyo TA-2090

Onkyo TA-2120

Onkyo TA-2130

Onkyo TA-2140

Onkyo TA-2200

Onkyo TA-2220

Onkyo TA-2230

Onkyo TA-2250

Onkyo TA-230

Onkyo TA-2330

Onkyo TA-2350

Onkyo TA-2360

Onkyo TA-2400