MW Trilogie Modell 1 specifications

Category : Needs work

Help to improve the entry.

The Trilogy Model 1 fully exploits the classic concept of the 3-way loudspeaker. The enormous responsiveness of the time-synchronized drivers allows the speaker to follow the signal path precisely. The Model 1 is equipped with high-performance drivers in all areas.

The frequency filters are largely responsible for the transducer properties of a loudspeaker. The circuit is relatively clear for a 3-way LS, even if the large number of components suggests otherwise. Thus, 19 capacitors form only 3 capacitor values. The components are glued with butyl compound and wired directly. The crossover is located in the separate chamber inside the double rear panel.

The connection to the amplifier is made via the WBT nextgen™ pole terminals with a vibration damper on the underside. This allows the cables to be connected unobtrusively and in the shortest possible way.

The housings are multi-layered made of different materials and solidly reinforced on the inside. This effort ensures the best acoustic properties. The noble piano lacquer surface in combinations with matt elements underlines the high standards. The speakers rest on a solid metal frame. The connection to the floor is made via Sicomin antispikes.

Concept

New price: 22000 Euro

The Trilogy Model 1 is available with active bass equalization. This ensures more depth and an even better time behavior. The electronic board is initially designed for installation in the Abacus Ampollo Dolifet.

Tweeter: BliSMa T34B-4

The tweeter excels with high performance parameters. The 34 mm beryllium membrane can handle enormous dynamic jumps due to the sensationally large linear stroke of +/- 1.5 mm. Due to the also sensationally low moving mass of only 0.26 g at this membrane size, a sensitivity (2.83 V / 1 m) of more than 97 dB is achieved in cooperation with the strong neodymium magnet. This combines speed and performance and contributes to the overall highly involved sound character.

Midrange: Eton Arcosia 7-318

The midrange driver, a 7" driver, has a membrane made of magnesium composite material. The membrane is provided with spirally arranged holes through which the back coating protrudes slightly. This gives the chassis not only its characteristic design, but also its radiantly colorful sound image.

Woofer: Eton SYMPHONY II 12-212/C8/62 HEX

33 cm basket diameter, 515 cm2 effective radiating area and a large linear diaphragm stroke, these are the key data for a substantial bass reproduction. With the ETON 12"he, the 3-layer Hexacone Sandwich diaphragm produces dry dynamic basses in the closed housing volume. The diaphragm is able to work cleanly far into the midrange range. The clear clean play of the midrange driver is thus not discolored by membrane resonances of the bass speaker.

Manufacturer Information

<back: Myro loudspeaker> <back: Myro >

  • 1 Description
    • 1.1 Active equalization
  • 2 Assembly
  • 3 Pictures
  • 4 Additional information
  • 1.1 Active equalization
  • Type: Floorstanding speaker
  • Ways: 3
  • Housing: closed
  • Dimensions (H x W x D) = 120 cm x 45 cm x 81.4 cm

MW Trilogie Modell 1


Comment:



Comment box:


MW Trilogie Modell 1 relate