Nubert nuVero AW-12 specifications

Help to improve the entry.

Help and adjust the entry so that it corresponds to the appropriate template.

Two 18cm woofers from the nuVero 14/ nuVero 140 series. (Glass fiber-paper membrane) High-pass filter at Tunigfrequency amplifier module SW-3200 has 350 watts of power Stainless steel truss feet

Double chassis arrangement: The double chassis arrangement on the AW-12 results in two advantages: From an acoustic point of view, the vertical distribution of the low-frequency sources reduces room resonances between floor and ceiling. Because two 18 cm woofers have about the same diaphragm area as a chassis with a diameter of 26 cm, the subwoofer can be made narrower and thus more discreet in appearance with similar power values.

Chassis Two superimposed 18 cm long stroke chassis with fiberglass paper membrane and more than 30 mm maximum deflection enable a particularly slim design. At the same time, the vertical chassis arrangement reduces the occurrence of room resonances (modes) between floor and ceiling that are prone to booming. Connecting strands woven into the centering spider guarantee clean and trouble-free operation of this woofer chassis, which has already proven itself in the nuVero 14, even with the most extreme deflections.

Amplifier module The amplifier module of the AW-12, which has been completely newly developed by us, has a high-quality power supply with toroidal transformer, which provides power reserves of up to 350 watts for dynamic music. In addition, a highly efficient switching power supply enables standby readiness with the lowest power consumption. This means that the power consumption is less than 0.5 watts. In the signal path, the amplifier module operates exclusively analogously. All parameters are adjusted via micro-controller and also stored in the off state. All settings for volume, filter and phase are realized by digital potentiometers.

Tech nical data

Power of the built–in power amplifier: 350 watts (music power)

Frequency response: 26 – 200 Hz (-3 dB) # 24 - 220 Hz (-6 dB) with adjustable upper and lower cutoff frequency

Input sensitivity / max. Input Voltage: – Line In (1-channel control) 0.15 Vrms / 3 vrms - High Level 3 Vrms / 40 vrms

Input Impedance: Line In 56 kΩ

Internal Resistance: Sat Line Out 100 Ω

Dimensions: (H x W x D) 61.5 x 23.4 x 42.5/44.5cm (depth without/with grid)

Weight : 20 kg

Nubert nuVero AW-12