Kenwood KA-7006 specifications

Category : Integrated amplifier

Brand : Kenwood

General

Connections

Technical data

Special equipment

  • Manufacturer: Kenwood
  • Model: KA-7006 (US version)< /li>
  • Type: Integrated amplifier
  • Years of construction: 1974 - 1976
  • Manufactured in: Japan
  • Color: Silver, Wooden Side panels
  • Power consumption: 140 W
  • Dimensions (WxHxD): 435 x 157 x 300 mm
  • Weight: 11.8 Kg
  • Factory price approx.: 75 '000 Yen (Japan, 1974); (this corresponds to about 1'100 DM, but as far as is known, these amplifiers were not sold in Europe)
  • Factory price Rack handles D-9: 5'000 yen (Japan, 1974); (this corresponds to about 80 DM)
  • Number of inputs:
    • Input sensitivity:
    • Phono 1 MM : 2.5mV, switchable 30 kOhm , 50 kOhm , max. 250 mV
    • Phono 2 MM: 2.5mV, 50 kOhm , max. 250 mV
    • Microphone: 2.5mV, 50 kOhm
    • Tuner: 150mV, 50 kOhm
    • AUX 1, 2: 150mV, 50 kOhm
    • Tape Play 1, 2: 150mV, 50 kOhm
    • Tape Play DIN 1, 2:
    • Main In: 1 V, 50 kOhm
  • Number of outputs:
    • Outputs:
    • Tape Rec 1, 2: 150mV, 50 kOhm
    • Tape Rec DIN 1, 2: 40mV, 70 kOhm
    • Pre-Out: 1 V, 100 ohm
    • Headphones: 0.2mV, 8 Ohm
    • Connectors for 3 Speaker pairs
  • Input sensitivity:
  • Phono 1 MM: 2.5mV, switchable 30 kOhm , 50 kOhm , max. 250 mV
  • Phono 2 MM: 2.5mV, 50 kOhm , max. 250 mV
  • Microphone: 2.5mV, 50 kOhm
  • Tuner: 150mV, 50 kOhm
  • AUX 1, 2: 150mV, 50 kOhm
  • Tape Play 1, 2: 150mV, 50 kOhm
  • Tape Play DIN 1, 2:
  • Main In: 1 V, 50 kOhm
  • Outputs:
  • Tape Rec 1, 2: 150mV, 50 kOhm
  • Tape Rec DIN 1, 2: 40mV, 70 kOhm
  • Pre-Out: 1 V, 100 ohm
  • Headphones: 0.2mV, 8 Ohm
  • Connectors for 3 pairs of speakers
  • Continuous power (with total harmonic distortion)
    • 8 Ohm s: 2x 55 W (RMS , 20Hz...20kHz)
    • 4 Ohm : 2x 70 W
  • Dynamic power
    • 8 Ohm : 2x 80 W
    • 4 Ohm : 2x 125 W
  • Total harmonic distortion: 0.2% THD at 8 ohm
  • Damping factor: 30 at 8 ohm< /li>
  • Frequency Response: 6 - 45'000 Hz
  • Signal-to-noise Ratio:
    • Phono 1.2: 76 dB
    • Microphone: 76 dB
    • Tuner: 90 dB
    • AUX 1, 2: 90 dB
    • Tape Play A, B: 90 dB
  • Tone Control < ul>
  • Bass: ± 10 dB at 100 Hz
  • Treble: ± 10 dB at 10 kHz
  • Loudness: +8dB at 100Hz, +3dB at 10kHz
  • High Filter : 6 dB/Oct. at 7 kHz
  • Low Filter : 12 dB/Oct. at 20 Hz / 40 Hz
  • Low Filter (Subsonic):
  • Muting:
    • 8 Ohm : 2x 55 W (RMS , 20Hz...20kHz)
    • 4 Ohm : 2x 70 W
    • 8 Ohm : 2x 80 W
    • 4 Ohm : 2x 125 W
    • Phono 1.2: 76 dB
    • Microphone: 76 dB
    • Tuner: 90 dB
    • AUX 1, 2: 90 dB
    • Tape Play A, B: 90 dB
    • Bass: ± 10 dB at 100 Hz
    • Treble: ± 10 dB at 10 kHz
    • 2 microphone inputs on the front panel
    • Tape Dubbing
    • Other models of the same series: < ul>
    • KA-3006
    • KA-4006
    • KA-5006
    • KA-6006
    • KA-7006
    • KA-8006
    • KA-9006
    • KA- 3006
    • KA-4006
    • KA-5006
    • KA-6006
    • KA-7006
    • KA-8006
    • KA-9006

    Kenwood KA-7006


    Comment:



    Comment box:


    Kenwood KA-7006 relate