Kenwood KX-1100 G specifications

Brand : Kenwood

General

connectors

Tech nical data

special features

number of inputs: 2
- Line (RCA) 77.5 mV/50kOhm
- microphone (6.3 mm Jack) 0.3 mV/600 Ohm
number of outputs: 2
- Line (RCA) to 0.49 V/2kOhm +
- headphone (6.3 mm Jack) of 0.85 mW/8Ohm

heads: 3
motor: 3
flutter: ± of 0.025% (WRMS ), ± 0,055% (DIN)
band types: Normal, chromium dioxide, metal
frequency response:
- Normal 20Hz - 18kHz +/-3dB
- chromium dioxide 20Hz - 19kHz +/-3dB
- metal 20Hz - 22kHz +/-3dB
THD:
signal-to-noise ratio:
- Dolby-C, metal: 75dB
- Dolby B, metal: 68dB
- without Dolby, metal: 60dB
Auto-Reverse: no
title search: no
Dolby B / C
MPX-Filter : Yes switchable
Fader: no
Pitch-control: no
CD Synchro recording: no

3 engines, direct drive with resonance-free coupling of the two drive shafts
- "Closed Loop Dual Capstan"
3 head Assembly with tape monitoring
- Amorphous Alloy double head for recording/ playback
- double-gap ferrite erase head
Built-in Eichoszialltor (400 Hz/ 10 Khz) for Bias and Level calibration
Linear four-digit real-time display (minutes, seconds)
monitor automatic recording function and pause Recording
Independent, Dolby B + C circuits for recording and playback
Complex Multi-voltage supply and a one-point extension of the individual circuits for interference-free operation
Adjustable headphone output
cassette playback, repeat playback (up to 16x)
timer operation for playback and recording