JVC R-S 77 specifications

Category : Receiver

Brand : JVC

General

connectors

Technical data

amplifier

Tuner

special features

catalogue of Technical data

number of inputs:
- Phono RCA (2.5 mV, 47 kΩ)
- Aux, 2x Tape RCA/DIN (180 mV, 43 kΩ)
- FM 75 Ω (coax terminals)
- MW 300 Ω (terminals)

number of outputs:
- 2x Tape Out
- 2x Stereo speakers (4 - 16 Ω)
- 1 x Stereo earphone (220 Ω)

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 60 W (20 - 20,000 Hz 0.005%
- 4 643961b8da111c0a15d770a1109a86d4:
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 2x 90 W
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0,001%
damping factor:
frequency response:
- 5 Hz - 30 kHz (full power bandwidth)
- 5 Hz - 50 kHz (± 1.0 dB)
signal-to-noise ratio:
- Phono 77 dB (New IHF 75 dB)
- Tape input 98 dB (New IHF 75 dB)
stereo channel separation:
control: 5-Band graphic Equalizer
- 40 Hz, 250 Hz, 1 kHz, 5 kHz and 15 kHz (± 12 dB)
Loudness: Yes
High Filter sound: Yes
Low Filter (Subsonic): no
Mute: no
Direct/Line-Straight: no

receiving: FM, MW
frequency:
- FM: 87.5 - 108 Mhz
- MW: 522 - 1611 Khz
frequency response: 10 Hz - 16 kHz (- 3dB)
input sensitivity:
- Mono: 26 dB, 0.8 µV at 75 Ω (9.3 dBf)
- Stereo: 46 dB, 20 µV at 75 Ω (37,3 dBf)
total harmonic distortion:
- Mono: 0,15% (1 kHz)
- Stereo: 0,3% (1 kHz)
signal-to-noise ratio:
- Mono: 80 dB (68 dB DIN)
- Stereo: 70 dB (62 dB DIN)
channel separation: 45 dB (1 kHz)
selectivity: 72 dB (± 300 Hz)
frequency selection: 1.0 dB
in addition to the wave selection:
mirror frequency attenuation: 78 dB (at 98 Mhz)
if rejection: 100 dB (at 98 Mhz)
ON-suppression:
output level:
RDS: no
station memory: 6 for FM and MW