Burmester 931 RDS specifications

Category : Tuner

Brand : Burmester

General

connectors

Technical data

special features

functions:

Other models from the same series:

  • manufacturer: Burmester
  • model: 931 RDS
  • year of construction:
  • Made in Germany
  • color: chrome Front, black housing
  • remote control: Yes (optional)
  • power consumption: 13.5 W
  • dimensions: 482 x 95 x 280 mm (WxHxD)
  • weight: 6.6 Kg (manual), 9 Kg (product brochure)
  • factory price approx.:
  • number of outputs (3):
    • Stereo unbalanced (2 x RCA)
    • Stereo tape deck asymmetric (2x RCA)
    • Stereo balanced (2 x XLR )
  • number of inputs (2):
    • 2x UKB antenna input (IEC , 1x steamed)
  • Stereo unbalanced (2 x RCA)
  • Stereo tape deck asymmetric (2x RCA)
  • Stereo balanced (2 x XLR )
  • 2x UKB antenna input (IEC , 1x steamed)
  • channels: (FM)
  • frequency:
    • FM: 87.5 - 108 Mhz
  • frequency response: 20 Hz - 15 kHz
  • input sensitivity:
    • Mono 4.2 dB/µV (30 dB SNR)
    • Stereo 42dB/µV (50 dB SNR)
  • total harmonic distortion: 0.007% (THD + N)
  • signal-to-noise ratio: 80 dB (70 dBA at 1 kHz)
  • channel separation: 60 dB (55 dB at 1 kHz)
  • selectivity:
  • frequency selection:
  • in addition to the wave selection:
  • mirror frequency attenuation:
  • ZF-attenuation:
  • ON-rejection: 90 dB (38 kHz)
  • output level:
  • RDS: Yes station identification
  • station memory: 60
  • FM: 87.5 - 108 Mhz
  • Mono 4.2 dB/µV (30 dB SNR)
  • Stereo 42dB/µV (50 dB SNR)
  • input amplifier with Gallium arsenide Transistors with 1 GHz cutoff frequency, linear-phase response and constant group delay
  • Seven tuning circuits for a high-selecting the reception frequency
  • Active High-Level mixer with an Intercept point 3. Regulation (Typ. +30dBm) for high intermodulation resistance (most complex military radio technology)
  • Wide-ZF (IF) bandwidth approx. 400kHz (typical bandwidths 200-250kHz)
    • For a soft sound image with two phase-linear, broadband 8-circuit LC bandpasses filtered and decoupled by amplifiers
    • Balancing of the IF to a total of 24 Filter s
    • IF amplifiers are operated with a balanced power supply
  • Using two separate stereo decoders!
    • Making each channel separately optimized and minimal crosstalk compared
  • power supply can be:
    • stray-field low to avoid the ring core transformer with a capacity of 50VA
    • screen total capacity of 29000µF alone in the power supply
    • Four separate voltage regulator directly to the circuit stages for stable voltage conditions in the Frontend
    • Additional elaborate stabilizing the tuning voltage with a specific capacity of 8000µF
    • decoupling of the supply voltage of the front-end through a special Filter to an Overlay of the supply voltage, the NF-stage HF
  • LF amplifier: Symmetrical, discrete and DC-coupled Burmester X-Amp stages (Class A) with Offset-control loop
    • Additional screening of the X-Amp-stages, with a total of 55000µF
    • No Relay in the NF-pathway, while Muting the output to ground short -
  • XLR occupancy from closed deviates from the Standard, and is: 1 = ground, 2 = Signal, 3 = Signal +
  • For a soft sound with a two-phase linear, broadband 8-circle-LC-band passports filtered by amplifier
  • balance, ZF decoupled to a total of 24 Filter s
  • if-amplifier with symmetrical power supply
  • Making each channel separately optimized and minimal crosstalk compared
  • scattered field can be poor, ring core transformer with a capacity of 50VA
  • operated Sieve capacity of a total of 29000µF alone in the power supply
  • Four separate voltage regulator directly to the circuit stages for stable voltage conditions in the Frontend
  • Additional elaborate stabilizing the tuning voltage with a specific capacity of 8000µF
  • decoupling of the supply voltage of the front-end through a special Filter to an Overlay of the supply voltage, the NF-levels with HF to avoid
  • Additional screening of the X-Amp-stages, with a total of 55000µF
  • No Relay in the NF-pathway, while Muting the output to ground is shorted
  • Display-Off
  • field strength indicator, with eight illuminated segments
  • Burmester remote control:
    • direct frequency input via keypad
    • station directly corresponds to input via numeric keypad
    • Station selection keys to Station - and + (of the STATION buttons on the device)
  • frequency input via keypad
  • Station selection keys to Station - and + (corresponds to a direct entry keypad
  • station directly to the STATION buttons on the device)


Comment:



Comment box:


Burmester 931 RDS relate