Remote control only as an accessory: yes (cable remote control RC-17 or RC-18)
Power consumption: HARD BASS
Dimensions: 440 x 465 x 240 mm (WxHxD)
Weight: 19.5 kg
Original price approx.: 1498.00 DM (1976) Price: 1979 1650.00 DM
Number of outputs: 3
DIN ( 0.5V)
Line (0.775V)
Headphones (30 mV, 8 ohms)
Number of Inputs: 2
Microphone (0.25mV / 5 kOhm )
Line (70 mV / 150 kOhm )
DIN (0.5V)
Line (0.775V)
Headphones (30 mV, 8 ohms)
Microphone (0.25mV / 5 kOhm )
Line (70 mV / 150 kOhm )
max. Coil diameter: 26.5cm
Drive: 3 motors
One 4-pole AC servo motor type SCM2-24KJ for the Capstan drive
Two 6-pole eddy current motors Type 24XO-MR for the belt plates
Heads: 3
1x GX extinguishing head type E4- 260
1x GX recording head type R4-200
1x GX playback head type P4-202
Tracks: 4
Tape speeds: 9.5 and 19 cm/s
Synchronisation fluctuations:
at 9.5 cm/s: ± 0.09%
at 19 cm/s: ±0.06%
Pitch variations:
Total frequency response:
at 9.5 cm/s: 30 - 19,000 Hz
at 19 cm/s : 20 - 25,000 Hz
Signal-to-noise ratio:
External voltage ratio:
Total harmonic distortion:
at 19 cm/s: < 0.5%
Equalization:
Noise voltage ratio:
Crosstalk attenuation: > 40dB
Extinguishing attenuation:
at 19 cm/sec: > 70dB
Pre-magnetization and extinguishing frequency: 100 kHz ±5kHz
One 4-pole AC Servo motor Type SCM2-24KJ for the Capstan drive
Two 6-pole Eddy current motors type 24XO-MR for the tape disc
1x GX-erasing head type E4-260
1x GX-recording head type R4-200
1x GX-playback head type P4-202
at 9.5 cm/s: ± ;0.09%
at 19 cm/s: ±0.06%
at 9.5 cm/s: 30 - 19,000 Hz
at 19 cm/s : 20 - 25,000 Hz
at 19 cm/s: < 0.5%
at 19 cm /sec: > 70dB
Low-wear GX recording and playback heads
Double-bracing NAB adapters (RH-12)
Other models of the same series (Here machines that have almost identical equipment-technology-electrical components but have "only" everything Small winders are):