Akai M-10 L/W specifications

Category : Tape machines

Brand : Akai

General

Connections

Tech nical data

Tech nical specifications Amplifier part

Special equipment

  • Manufacturer: Akai
  • Model: M-10 L/W
    • L = Leather-covered case
    • W = Wooden case Walnut veneered
  • Type: Autoreverse Coil tape with built-in amplifier
  • Years of construction: 1969 - 1971
  • Manufactured in: Japan
  • Color: Silver, case walnut veneered
  • Remote control:
  • Power consumption: 165 W
  • Dimensions (WxHxD): 350 x 474 x 242 mm
  • Weight: 22 kg
  • Factory price approx.:
    • Version L: 1'600 DM
    • Version W: 1'650 DM
  • L = Leather-covered housing
  • W = Walnut veneered wooden housing
  • Version L: 1'600 DM
  • Version W: 1'650 DM
  • Number of inputs:
    • Microphone: 0.5 mV
    • Phono, tuner: 50 mV, max. 1.23V
    • DIN: switchable
    • Low: 5 mV
    • High: 50 mV
  • Number of outputs:
    • Line: 50 mV
    • DIN: 10 mV
    • Headphones:
  • Microphone: 0.5 mV
  • Phono, Tuner: 50 mV, max. 1.23V
  • DIN: switchable
  • Low: 5 mV
  • High: 50 mV
  • Line: 50 mV
  • DIN: 10 mV
  • Headphones:
    • Max. Coil Diameter: 18 cm
    • Drive: 3 motors
    • Heads: 3
    • Tracks: 4
    • Belt speeds:
      • 4.75 cm/s
      • 9.5 cm/s
      • 19 cm/s
      • 38 cm/s only optional
    • Slip:
    • Synchronisation fluctuations:
      • < 0.20% RMS (4.75 cm/s)
      • < 0.12% RMS (9.5 cm/s)
      • < 0.08% RMS (19 cm/s)
    • Pitch fluctuations:
    • Total frequency response: < ul>
    • 30Hz-9kHz ±3 dB (4.75 cm/s)
    • 30Hz-19kHz ±3 dB (9.5 cm/s)
    • 30Hz-26kHz ±3 dB (19 cm/s)
  • Signal-to-noise ratio: > 50 dB
  • External voltage ratio:
  • Total harmonic distortion: < 2 % (1 kHz)
  • Equalization: according to NART B
  • Crosstalk attenuation:
  • Cancellation attenuation:
  • Pre-magnetization and cancellation frequency: 100 kHz
    • 4.75 cm/s
    • 9.5cm/s
    • 19 cm/s
    • 38 cm/s only optional
    • < 0.20% RMS (4.75 cm/s)
    • < 0.12% RMS (9.5 cm/s)
    • < 0.08% RMS (19 cm/s)
    • 30Hz-9kHz ±3dB(4.75cm/s)
    • 30Hz-19kHz ±3dB(9.5cm/s)
    • 30Hz-26kHz ±3dB(19cm/s)
    • Continuous power:
      • 8 Ohm : 30W(15+15W)
      • 4 Ohm :
    • Dynamic power:
      • 8 Ohm : 40 watts (20+20W)
      • 4 Ohm :
    • Tone control: Yes
      • Bass: separately adjustable
      • Treble: separately adjustable
    • Speaker: L/R, each 10 x 15cm
    • 8 Ohm : 30 watts (15+15W)
    • 4 Ohm :
    • 8 Ohm : 40 watts (20+20W)
    • 4 Ohm :
      Bass: separately adjustable
    • Treble: separately adjustable
    < ul>
  • Crossfield sound head system: In the case of the crossfield sound head system, the so-called pre-magnetization of the tape does not take place - as is generally the case - via the recording / playback head, but via a separate sound head (bias head), which is opposite the aforementioned recording / playback head. This sound head arrangement enables signal modulation over the entire audio frequency spectrum without any impairment due to the premagnetization, as is the case with other sound head systems.
  • Automatic reversing
  • Auto-stop and automatic shutdown
  • Multiplay
  • Tone controls separately for bass and treble
  • Vertical and horizontal operation possible
    • Further information on Akai Crossfield tonehead system
      • Akai X-330
    • Akai X-330
    • Other models of the same series:
    • Akai 1710 L
    • Akai 1710 W
    • Akai 4000
    • Akai 4000 D
    • Akai 4000 DS
    • Akai GX-220
    • Akai GX-220 D
    • Akai GX-280
    • Akai GX-280 D
    • Akai GX-365
    • Akai GX-365 D
    • Akai M-10 L/W
    • Akai X-150 D
    • Akai X-200 D
    • Akai X-300
    • Akai X-330
    • Akai X-330 D
    • Akai X-360
    • Akai X-360 D
    • Akai X-1800 SD
    • Akai X-2000 SD
    • Akai X-5000 L/W
    < ul>
  • Excerpt from brochure: Akai M-10 L/W
    • External link to website "Audio Heritage": [[1]]

    Akai M-10 L/W


    Comment:



    Comment box:


    Akai M-10 L/W relate