Aitos EV 802 specifications

Category : Needs work

Help to improve the entry.

General

Connections

Tech nical data

Special features of tube amplifiers

Special equipment

Other models of the same series: Aitos OTL power amplifier EV 903

EV 803: [1] Aitos homepage: [2]

  • 1 data
  • 2 comments
  • 3 pictures
  • 4 reports
  • 5 links
  • Manufacturer: Aitos
  • Model: EV 803
  • Years of manufacture: from 1981 (EV 801) to now (EV803)
  • Manufactured in: Netherlands
  • Color: Black
  • Type: Double monos separate enclosures - analog< /li>
  • Remote control: Connector for switching the amplifier on and off via AITOS tube preamps
  • Power consumption:
    • Standby: 0W
    • Idle: 100W
    • Full scale: 350W
  • Dimensions (WxHxD): 35cm x 20cm x 42cm - per monoblock
  • Weight: 14 kg per amplifier
  • New price approx.: 12.500€
  • Standby: 0W
  • Idle: 100W
  • Full scale: 350W
  • Number of inputs: RCA - 2 x parallel (gold coated)
    • RCA gold-plated: 270kOhm 1.5V eff.
  • Number of outputs: 2 x parallel WBT (gold-plated) for bi-wiring
    • LS-Stereo A: 8 to 16Ohm automatic adjustment
    • LS-Stereo B: 8 to 16Ohm automatic adjustment
  • RCA gold-plated: 270kOhm 1.5V eff.
  • LS-Stereo A: 8 to 16Ohm automatic adjustment
  • LS-Stereo B: 8 to 16Ohm automatic adjustment
  • Continuous power (with total harmonic distortion)
    • 10 Ohm : 120W
  • Dynamic power
    • 8 Ohm :
    • 4 ohms:
  • Total Harmonic distortion: < 0.25 %
  • Attenuation factor: >100
  • Frequency response: 12Hz - 225kHz -3db
  • Signal-to-noise ratio: >100db
  • Stereo channel separation: Depending on Preamp
  • 10 Ohm : 120W
  • 8 Ohm :
  • 4 Ohm :
  • Principle: OTL tube end monos
  • Tube assembly
    • 4 Power tubes
    • 3 double triodes
    • < li>1 pentode
  • Transformers: A high-voltage/heating transformer and a transformer for automatic switching
    • High voltage/ heating
    • Auxiliary voltage
  • 4 power tubes
  • 3 double triodes
  • 1 pentode
< ul>
  • High voltage/ heating
  • Auxiliary voltage
    • Diagnostic socket (service) for checking the internal voltages
    • Input connector for switching the power amplifier on and off via AITOS tube preamps
    • LED indicators for remote control and misdirection of the fuses
    • A built-in mains phase control.
    • Three-dimensional wiring
    • Delay of the anode voltage when switching on
    • Built-in operating hour counter

    Aitos EV 802

    Aitos EV 802


    Comment:



    Comment box:


    Aitos EV 802 relate