Aitos EV 901 specifications
Category : Needs work
Help to improve the entry.
General
Connections
Tech nical data
Special features of tube amplifiers
Special equipment
Other models of the same series:
Aitos Homepage
- 1 data per monoblock
- 2 comments
- 3 pictures
- 4 reports
- 5 links
- Manufacturer: Aitos
- Model: EV 901
- Type: OTL Tube mono
- Years of manufacture: from about 1988 to now
- Manufactured in: Netherlands
- Color: Black
- Type: Analog
- Remote control: No
- Power consumption:
- Full scale: 500W
Dimensions (WxHxD): 50cm x 20cm x 42cm Weight: 19kg Factory price approx.: 13950€ per pair- Idle: 130W
- Full scale: 500W
- Number of inputs: 1
- Gold plated Chinch: 270kOhm 1.5V eff.
- Number of outputs: 2 (parallel)
- LS-Stereo A: 4 to 12 ohms automatic adjustment
- LS-Stereo B: 4 to 12 ohms automatic adjustment
- Chinch gold plated: 270kOhm 1.5V eff.
- LS-Stereo A: 4 to 12 Ohm automatic adjustment
- LS-Stereo B: 4 to 12 ohm automatic adjustment
- Continuous power (with total harmonic distortion)
- Dynamic power
- Total harmonic distortion: <0.25%
- Attenuation factor: >150
- Frequency response: 8Hz - 225kHz -3db
- Signal-to-noise ratio: >100 db
- Stereo channel separation: Depending on preamp
- Principle: OTL tube output stage
- Tube assembly
- 6 power tubes
- 3 double triodes
- 1 pentode
- Transformers: 3
- High voltage
- Auxiliary voltage/heating
- Switch-on electronics
- 6 Power tubes
- 3 double triodes
- 1 pentode
High voltage - Auxiliary voltage/heating
- Power-on electronics
- Diagnostic socket (service) for checking the internal voltages
- Input connector for switching the power amplifier on and off via AITOS tube preamps
- LED indicators for remote control and misdirection of the fuses
- A built-in mains phase control.
- Three-dimensional wiring
- Delay of the anode voltage when switching on
- Built-in operating hour counter
Comment:
Comment box:
Aitos EV 901 relate