The above performance data are original specifications according to the data sheet. I made my own measurements with 1000 Hz sine input signal:
The measurements were made with a bifilar and purely resistive 1000 W load resistor up to the clipping limit. The services are permanently valid (as long as there is electricity). They also do not change significantly at other frequencies.
This power amplifier is obviously also much more resilient, as it turned out for me. For years, the WFA-220 has been running at 2.66 ohms with me and that even at relatively long and very high levels and that without any problem!! This is already very remarkable with this model.
Manufacturer: Wangine
Model: WFA 220
Color: Silver
Type: Stereo
Power Consumption: max 1000 Watts
Dimensions: 422 x 320 x 155 mm (WxHxD)
Weight: 17.8 Kg
Continuous power
8 ohms: 2x 250 watts
4 ohms: 2x 350 watts
Dynamic power
8 Ohm s: 2x 350 watts
4 Ohm s: 2x 500 watts
Total harmonic distortion: < 0.015%< /li>
Attenuation factor: 200
S/N Ratio: 110 DB
Frequency Range: 5-200000 Hz
Bandwidth: 20-25000 Hz
Input Impedance: 50 K-Ohm
Input Sensitivity: 1.2V.
8 Ohm : 2x 250 Watts
4 Ohm s: 2x 350 Watts
8 Ohm s: 2x 350 watts
4 Ohm s: 2x 500 Watts
Fet 4
IC 10
Transistors 79
LEDs 138
Bridge-identical 3
Diodes 39
350 W at 8 ohms / channel
480 W at 4 ohms / channel
Wangine WFA 220 stereo power amplifier, Klaus Pohlig [1]