Vincent SV 238 specifications

0db377921f4ce762c62526131097968f

Connections

Technical data

Special equipment

Other models of the manufacturer:

The distribution: "2 x 200 watts at 8 ohms, 2 x 400 watts at 4 ohms and more than 700 watts at 2 ohms - these are the impressive data of this amplifier. A pure power plant paired with many refinements of high-end technology. Crystall chips for processing the small signals, all tone control functions run electronically - monitored by a CPU. This means no mechanical interference and no wear. By the way, the SV-238 also delivers 2 x 60 watts to 8 ohms in Class-A mode. The switch-over to the AB mode is carried out automatically by the amplifier.

The SV 238 operates in the Class A range up to a power of about 60W sine. The full power is at 200W at a load of 8 ohms, but the device also drives 4 ohms loads, here the maximum power is at 400W. However, the device is also 2 ohms stable and is able to deliver up to over 700W of power in this load range. This is achieved with a well-dimensioned power supply and a 1500VA transformer. Furthermore, 16 Sanken transistors per channel are working on the final amplification. In the field of power supply, the capacities were increased and 120,000uF were used. The circuit of the device was designed as fully balanced, all functions in the signal path are controlled via a CPU (volume, balance, etc.), which means that no mechanical wear and no mechanical noise can occur. The functions are clearly displayed on the display and transmitted to the operator."

German Sales GeKo http://www.gekohifi.de/vincent/sv238.html

http://www.extrem-audio.de/pdf/test_sv238_stereo0602.pdf

http://www.gekohifi.de/pdf/info_sv238.pdf

Manufacturer: Vincent
Model: SV 238
Years of construction: 2003-
Type: Integrated amplifier
Remote control: yes
Power consumption: 1000 watts
Dimensions: 430 x 180 x 530 mm
Weight: approx. 38 kg
Color: silver or black
Factory price approx.: 2.950 Euro

Number of inputs: 6
- 5 x RCA
- 1 x XLR

1 x Pre Out RCA,
1 x Pre Out XLR ,
4 x 2 Speaker Terminals

5 x RCA
1 x XLR

1 x Pre Out RCA,
1 x Pre Out XLR ,
4 x 2 Speaker terminals

Continuous power (with total harmonic distortion)
- 8 Ohm : 2 x 50W RMS Class-A
- 8 Ohm : 2 x 200W RMS
- 4 Ohm : 2 x 400W RMS
- 2 Ohm : 2 x 700W RMS
Dynamic power
- 8 Ohm :
- 4 Ohm :
< /li>
Total harmonic distortion: <0,1 % max. (1 kHz, 1W)
Attenuation factor: >95db
Input (sensitivity/impedance): 250mV / 47KOhm
Output (level/impedance):
Frequency response: 20 – 20,000Hz (±0.5dB)
Tone control: Crystall Chips control
Loudness: Crystall Chips Control
Subsonic: Crystall Chips control
Mute: yes
Balance: yes
Direct/LineStraight: always / Crystall Chips control
Ripple voltage distance (short-circuited):
Stereo channel separation:

8 ohms: 2 x 50W RMS Class-A
8 Ohm : 2 x 200W RMS
4 Ohm : 2 x 400W RMS
2 Ohm : 2 x 700W RMS