Tensai TA 2045 specifications

Category : Integrated amplifier

Brand : Tensai

General

connectors

Technical data

special features

Other models from the same series:

  • manufacturer: crank bearing RHS (Akai )
  • model: TA-2045
  • year of construction: 1981
  • Made in Japan
  • colors: dark brown, Chrome
  • type: Analog
  • remote control: no
  • power consumption: 250W
  • dimensions:
  • weight:
  • factory price approx.:
  • number of inputs: 8 + Power Amp
    • Phono 1 input sensitivity: 2.5 mV
    • Phono 2 input sensitivity: 2.5 mV
    • Tuner input sensitivity: 160mV
    • Aux 1 input sensitivity: 160mV
    • Aux 2 input sensitivity: 160mV
    • Tape 1 in input sensitivity: 160mV
    • Tape 2 input sensitivity: 160mV
    • Mic input sensitivity: 2.5 mV
  • number of outputs: 2 + Pre Amp
    • Tape 1 out
    • Tape 2 out
  • Phono 1 input sensitivity: 2.5 mV
  • Phono 2 input sensitivity: 2.5 mV
  • Tuner input sensitivity: 160mV
  • Aux 1 input sensitivity: 160mV
  • Aux 2 input sensitivity: 160mV
  • Tape 1 in input sensitivity: 160mV
  • Tape 2 input sensitivity: 160mV
  • Mic input sensitivity: 2.5 mV
  • Tape 1 out
  • Tape 2 out
  • the duration of the performance (in the case of harmonic distortion XX)
    • 8 Ohm : 2 x 40W
    • 4 Ohm : 2 x 60W
  • dynamic performance
    • 8 Ohm :
    • 4 Ohm :
  • total harmonic distortion: 0.1% (T. H. D 1W)
  • damping factor:
  • frequency response:
    • power bandwidth: 20 - 50000Hz
    • frequency response: 17 - 40000Hz
  • signal-to-noise ratio:
    • Phono: 70dB
    • Mic: 65dB
    • Aux: 85dB
  • stereo channel separation:
    • 1 kHz: 60dB
    • at 10 kHz: 40 dB
  • sound-control:
    • Bass: (100Hz) 10dB
    • height: (10kHz) 10dB
  • Loudness:
    • 100Hz: 10dB
    • 10kHz: 6dB
  • High Filter : 7dB/oct.
  • Low Filter : 7dB/oct.
  • Mute: 20dB
  • Direct/Line-Straight: No
  • 8 Ohm : 2 x 40W
  • 4 Ohm : 2 x 60W
  • 8 Ohm :
  • 4 Ohm :
  • Power Bandwidth: 20 - 50000Hz
  • Frequency response: 17 - 40000Hz
    Phono: 70dB
  • Mic: 65dB
  • Aux: 85dB
  • at 1kHz: 60dB
  • at 10kHz: 40dB
  • Bass: (100Hz) 10dB
  • Treble: (10kHz) 10dB
  • 100Hz: 10dB
  • 10kHz: 6dB
  • Fuse Circuits:
    • Transient Kill
    • Current Limiter to protect the power transistors and the loudspeakers from short circuit and overload
    Transient Kill
  • Current limiter to protect the power transistors and the loudspeakers from short circuit and overload
  • Power transistors:
    • 2SD 428; 100V 7A 60W TO-3
    • 2SB 558; 100V 7A 60W TO-3; complementary to 2SD 428
  • 2SD 428; 100V 7A 60W TO-3
  • 2SB 558; 100V 7A 60W TO-3; complementary to 2SD 428
  • front view
  • Rear view
  • Block diagram (on the top of the housing)

Tensai TA 2045

Tensai TA 2045

Tensai TA 2045


Comment:



Comment box:


Tensai TA 2045 relate