Technics RS-AZ 7 specifications

General

connectors

Tech nical data

special features

Other models from the same series:

Video rewiev

number of inputs: 2
- Line 100 mV/47 K-ohms
- Sensor for control commands via remote control
number of outputs: 2
- Line 500 mV/500 Ohm
- headphone output, 6.3 mm 190 mV, 8 Ohm s (adjustable)

heads: 3
engines: 2
constant velocity fluctuations: 0,07/0,2 % (WRMS /DIN)
band types: I, II, and IV
frequency response:
- type I: 30 Hz - 17 kHz ± 3 dB; 20 Hz - 18 kHz (DIN)
- type II: 30 Hz - 18 kHz ± 3dB; 20 Hz - 19 kHz (DIN)
- type IV: 30 Hz - 23 kHz ± 3 dB; 20 Hz - 24 kHz (DIN)
THD:
signal-to-noise ratio: (signal level = Full-scale output; type-II Band)
- without noise reduction: 62 dB
- with Dolby B noise reduction: 71 dB
- with Dolby C noise reduction: 78 dB
Auto-Reverse: no
title search: Yes, TPS
Dolby: Dolby B, C, HX Pro
MPX-Filter : Yes, can be activated
Fader: no
Pitch control: No
CD Synchro recording: no

Tech nics Class AA - device
Linear magnetic-Field Class AA circuit in the recording electronics
band calibration (Advanced a3ac61932ac17091f7b6c0b56618a5b4)
Vibration-absorbing THCB-housing floor
3-head System with thin-film head (Amorphous Z)
Automatic selection of tape monitor (monitor circuit)2-motor drive logic controller
Fast rewind (about 35 sec. for C-60 cassettes)
Drive with logic control and 2 motors
motorized cassette compartment
Direct playback tests (PLAY DIRECT)
Remote controllable (via Tech nics system remote control)
Switchable MPX filter
Linear electronic tape counter with real-time display
Track search (TPS )
Automatic band type setting
Level controller, separate balance controller
Headphone connection with volume control
Timer function (timer can be switched on)
precise, firm fit of the cassette by motor control