Tandberg Modell 10 XD specifications

Brand : Ta

General

connectors

Tech nical data

special features

number of outputs: 3
- Radio (5pol. DIN): 0.75V, 5 kOhm
- Line out (RCA): 1.5V, 150 ohm
- Headphones (stereo jack): 5 mW, 8 ohm

Number of inputs: 3
- Microphone (2 x mono jack) : 0.23mV, 200 ohm
- Radio (5pol. DIN) : 8 mV, 50 kOhm
- Line in (RCA): 30 mV, 200 kOhm

max. Coil diameter: 26.5 cm
drive: 3 engines
heads: 4 ( 2 x Erase, 1 x record, 1 x playback)
tracks: 2-track and 4-track Version
belt speeds: 9,5 / 19 / 38 cm/s
slip:
flutter:
- 9.5 cm/s: < 0,15%
- 19 cm/s: < 0,09%
- 38 cm/s: < 0.07% in
Pitch changes:
- 9.5 cm/s:
- 19 cm/s:
- 38 cm/s:
overall frequency response (DIN 45500 ):
- 9.5 cm/s: 30 - 20,000 Hz
- 19 cm/s: 30 - 26.000 Hz
- 38 cm/s: 30 - 26.000 Hz
signal-to-noise ratio: 69 dB
s / n ratio (Full scale):
- 56 dB without Dolby
- 60 dB with Dolby
quiet noise ratio:
- 68 dB (Full scale, 10 XD-2)
- 66 dB (Full scale, 10 XD-4)
total harmonic distortion: < 2%
equalization:
Crosstalk:
- 60 dB (1 kHz, opposing double-track recording, Mono)
- 50 dB (1 kHz, opposite Stereo operation)
- 50 dB (1 kHz, Stereo)
delete attenuation: 70 dB
premagnetization and deletion frequency: 85,5 kHz
attenuation of a track, Delete the other: < 0.2 dB

Electronic control panel with "touch control", built with integrated digital logic circuits. Electronically controlled sound motor. 2 Fast winding motors. Tandberg Crossfield technique. One-handed ribbon threading. Servo brakes for constant belt tension. Cueing. 3 Belt speeds. Feeler levers for the protection of the ban-des. Separate flat track controllers for all inputs and outputs. Remote control accessory for all tape running functions. Built-in stereo mixing console. Side panels available in walnut, teak, rosewood, oak and sanding varnish white. Horizontal and vertical operation. Automatic final shutdown.

Other models of the same series:
- 10 X-2 (2 track, without Dolby)
- 10 XD-2 (2 track, with Dolby)
- 10 X-4 (4 track, without Dolby)
- 10 XD-4 (4 track, with Dolby)