Sony TA-1150 specifications
Category : Integrated amplifier
Brand : Sony
General
connectors
Technical data
special features
- brand: Sony
- model: TA-1150
- type: amplifier
- year of construction: 1973 - 1977
- Made in Japan
- color: Front silver
- remote control: no
- power consumption: 250 W
- dimensions (WxHxD): 400 x 149 x 316 mm
- weight: 8.3 kg
- factory price approx.: 798 DM
- number of inputs:
- Phono 1, 2 MM 2 mV / 47 kOhm
- Tuner: 140 mV / 50 K-ohms
- AUX 1, 2: 140 mV / 50 K-ohms
- Tape Play 1, 2: 140 mV / 50 K-ohms
- Tape Play 1 DIN: 140 mV / 50 K-ohms
- Main:
- number of outputs:
- Tape Rec 1, 2: 140 mV, 10 kOhm
- Tape Rec 1 DIN: 24 mV, 82 kOhm
- Pre Out: 800 mV to 2.7 kOhm
- Center Out: it is 800 mV, 680 Ohm s
- headphone (6.3 mm Jack)
- 2 pairs of Speakers
- Phono 1, 2 MM 2 mV / 47 kOhm
- Tuner: 140 mV / 50 K-ohms
- AUX 1, 2: 140 mV / 50 K-ohms
- Tape Play 1, 2: 140 mV / 50 K-ohms
- Tape Play 1 DIN: 140 mV / 50 K-ohms
- Main In:
- Tape Rec 1, 2: 140 mV, 10 kOhm
- Tape Rec 1 DIN: 24 mV, 82 kOhm
- Pre Out: 800 mV to 2.7 kOhm
- Center Out: it is 800 mV, 680 Ohm s
- headphone (6.3 mm Jack)
- 2 pairs of Speakers
- continuous power:
- 8 Ohm : 2x 30 W (RMS , 20 Hz to 20,000 Hz), 2x 35 W (RMS , 1,000 Hz)
- 4 Ohm :
- dynamic performance
- total harmonic distortion: 0.1 %
- damping factor: 100 (8 Ohm )
- frequency response:
- Phono RIAA: 30 - 15,000 Hz, ± 0.3 dB
- High Level: 10 to 200,000 Hz, + 0 dB, - 2 dB
- signal-to-noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- control:
- Bass: ± 10 dB at 100 Hz
- treble sound: ± 10 dB at 10 kHz
- Loudness: Yes, + 8 dB at 50 Hz, + 3 dB at 10 kHz
- High Filter : 6 dB / octave above 7 kHz
- Low Filter (Subsonic): - 6 dB / octave below 100 Hz
- Muting:
- 8 Ohm : 2x 30 W (RMS , 20 Hz to 20,000 Hz), 2x 35 W (RMS , 1,000 Hz)
- 4 Ohm :
- Phono RIAA: 30 - 15,000 Hz ± 0.3 dB
- High Level: 10 to 200,000 Hz, + 0 dB - 2 dB
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Bass: ± 10 dB at 100 Hz
- height: ± 10 dB at 10 kHz
Comment:
Comment box:
Sony TA-1150 relate