Sony DTC-2000 ES specifications

Brand : Sony

General

connectors

Tech nical data

special features

inputs:
- LINE IN: RCA 47 kOhm -4db
- DIGITAL IN: RCA 75 Ohm 0.5 VPP, +- 20%
- DIGITAL IN Optical:
- MIC: 6.3 mm Jack
outputs:
- LINE OUT: RCA 470 OHM -4 db
- PHONES: 6.3 mm Jack, 220 Ohm , 1.3 mW
- DIGITAL OUT: RCA 75 Ohm 0.5 VPP, +- 20%

data of the band recording
- track distance: 13.6 to (for 20.4 to)
- sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz
- modulation type: 8-10 Modulation
- transfer rate: 2,46 MBit/s
- number of channels: 2 (Stereo)
- D/A conversion (quantization)
  - standard: 16-Bit, linear
  - Longplay: 12-Bit, non-linear
frequency response
- standard play: 2-22.000 Hz (+-0.5 db)
- Longplay: 2-14.500 Hz (+-0.5 db)
Signal-to-noise ratio
- standard play: 94 db
- Longplay: 94 db
dynamic range
- standard play: 94 db
- Longplay: 94 db
Overall total harmonic distortion
- standard play: under 0,0035% (1kHz)
- Longplay: under 0,075% (1kHz)
flutter: below detection limit

track distance: 13.6 to (for 20.4 to)
sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz
type of modulation: 8-10 Modulation
transfer rate: 2,46 MBit/s
number of channels: 2 (Stereo)
D/A conversion (quantization)
- standard: 16-Bit, linear
- Longplay: 12-Bit, non-linear

Only for the German market, it was first offered in technical terms, the other version, which can't be done on a different device name to recognize. The genuine rear belt control pulley offered in all other markets from the model launch was missing here. The device intended for the German market had a head drum with only 2 heads, the international version had a 4-head drum.
The 4-head version was subsequently also offered in Germany at the same price.
Important for second-hand buyers: Devices with a 2-head drum can be recognized by the missing "Tape Monitor" switch directly above the level controller.