Sherwood RV-5090 RDS specifications
Category : A/V-Receiver
Brand : Sherwood
brand: Sherwood
model: RV-5090 RDS
Other models from the same series:
- Amplifier section:
- output power:
- 5 x 65 watts at 8 Ohm s
- 2 x 70 watts into 8 Ohm s
- Individ ual volume adjustment for Center, Surround and Subwoofer
- Subwoofer-Level adjustment via remote control
- Electronic setting of the master volume: -80 dB to 0 dB (1 dB steps)
- mute with the remote control (MUTE)
- a high and a low setting (Front channels)
- Linear circuit to bypass the Tone control (Tone Direct)
- connections:
- 3 Audio inputs
- 2 Audio outputs
- 3 Video inputs
- 2 Video outputs
- 5.1-channel input for an external Decoder (e.g. Dolby Digital, DTS, MPEG 2)
- pre-amplifier outputs for Center and Rear channels
- Subwoofer output with low-pass filters
- front-panel input for Camcorder or games console
- Surround functions:
- Dolby Surround Prologic
- Dolby 3-Stereo
- DSP (theatre, concert hall, Simulated)
- Surround and DSP processor NJW-1103 (NJRC)
- test tone generator for 4 or 5 channels (depending on the selected operating mode)
- Digital time delay DELAY for rear channels (adjustable from 15 to 50 ms)
- tuner part:
- FM and medium wave
- 30 programmable station memory
- Radio data System RDS
- station name (PS)
- PTY-search function
- EON/PTY
- EON/TA
- radio text (RT)
- time (CT)
- automatic tuning and manual tuning (up and down)
- memory scan
- Manual and automatic Stereo/Mono switching
- storage of the last used settings (input selection, Surround settings, Radio program, memory, etc.)
- sleep timer (Sleep Timer, 10-90 min.) with Display Dimmer
- headphone connector, a separate speaker switch
- Mechanical power switch, power-saving "Stand-By"-transformer
- power output socket (switched)
- System-remote control DIGI LINK III and "Auto Function"
- output power:
- 5 x 65 watts at 8 Ohm s
- 2 x 70 watts into 8 Ohm s
- Individ ual volume adjustment for Center, Surround and Subwoofer
- Subwoofer-Level adjustment via remote control
- Electronic setting of the master volume: -80 dB to 0 dB (1 dB steps)
- mute with the remote control (MUTE)
- a high and a low setting (Front channels)
- Linear circuit to bypass the Tone control (Tone Direct)
- connections:
- 3 Audio inputs
- 2 Audio outputs
- 3 Video inputs
- 2 Video outputs
- 5.1-channel input for an external Decoder (e.g. Dolby Digital, DTS, MPEG 2)
- pre-amplifier outputs for Center and Rear channels
- Subwoofer output with low-pass filters
- front-panel input for Camcorder or games console
- Surround functions:
- Dolby Surround Prologic
- Dolby 3-Stereo
- DSP (theatre, concert hall, Simulated)
- Surround and DSP processor NJW-1103 (NJRC)
- test tone generator for 4 or 5 channels (depending on the selected operating mode)
- Digital time delay DELAY for rear channels (adjustable from 15 to 50 ms)
- 5 x 65 watts at 8 Ohm s
- 2 x 70 watts into 8 Ohm s
- 3 Audio inputs
- 2 Audio outputs
- 3 Video inputs
- 2 Video outputs
- 5.1-channel input for an external Decoder (e.g. Dolby Digital, DTS, MPEG 2)
- pre-amplifier outputs for Center and Rear channels
- Subwoofer output with low-pass filters
- front-panel input for Camcorder or games console
- Dolby Surround Prologic
- Dolby 3-Stereo
- DSP (theatre, concert hall, Simulated)
- Surround and DSP processor NJW-1103 (NJRC)
- test tone generator for 4 or 5 channels (depending on the selected operating mode)
- Digital time delay DELAY for rear channels (adjustable from 15 to 50 ms)
- FM and medium wave
- 30 programmable station memory
- Radio data System RDS
- station name (PS)
- PTY-search function
- EON/PTY
- EON/TA
- radio text (RT)
- time (CT)
- automatic tuning and manual tuning (up and down)
- memory scan
- Manual and automatic Stereo/Mono switching
Comment:
Comment box:
Sherwood RV-5090 RDS relate