A new circuit with a very high-quality National Audio IC in the input stage has been used since mid-2010. Previously, this was an Ic of type AD 797. The previous hedgehogs cannot be upgraded to this level by an upgrade!
Manufacturer: SAC
Model: PA 50 T
Years of manufacture:
Manufactured in: Germany
Color: Black
Type: Mono Analog
Remote control: no
Power consumption min./max. : 15 W /350 W
Dimensions: 170 x 82 x 205 (W x H x D)
Weight: 4.5kg
Factory price approx.: (pair)
Number of inputs: 1
1 x Chinch (with sensitivity/impedance) 22kOhm
Number of outputs: 1
Speaker terminals with sockets for "banana" plugs
Power connection (220V): Permanently connected
1 x Chinch (with sensitivity/impedance) 22kOhm
Speaker terminals with sockets for "banana" plugs
Continuous power (with total harmonic distortion < 0.1% THD):
Frequency response: 2Hz - 200khz (manufacturer's specification)
Signal-to-noise ratio: 96 db (manufacturer's specification)
Stereo channel separation: 98 db (manufacturer's specification)
8 Ohm : 75W (manufacturer's specification)
4 Ohm : 110W (manufacturer's specification)
2 Ohm : 140W (manufacturer's specification)
max. 15 A current
Protection circuits for overtemperature , DC voltage , subsonic frequencies
The first model of this series was the power amplifier SAC Igel PA 40 , the current model is the model SAC Igel 60 .
The manufacturer offers an upgrade service ( 280 € ) in which sound-determining components are replaced with new ones (if necessary). In any case, new power supply electrolytic capacitors from Panasonic , lower-induction emitter resistors, fresh end transistors are used. Instead of Sank 2SC2837 and 2SA1294, the same types are used by the Sino-Indian company ISC.
The preliminary stage "beta"also belongs to this series.