Rotel X3 specifications

Brand : Rotel

General

Technical data

Digital

Other models in this series:

User manual Rotel Michi X3 User manual Rotel Michi X3 S2 Homepage Rotel

Music power IHF-a 20Hz - 20kHz THD 0.008%:
- 8 643961b8da111c0a15d770a1109a86d4: 175W
- 4 ohm: 350W
Continuous power DIN 1kHz THD <1.0%:
- 8 643961b8da111c0a15d770a1109a86d4: 200W
- 4 643961b8da111c0a15d770a1109a86d4: 400W
Total harmonic distortion THD IHF-a: < 0.008%
Intermodulations TIM : < 0,03%
- 60 Hz : 7 kHz = 4 : 1
Bandwidth:
- Phono MM: 20Hz - 20kHz -0.0dB - +0.4dB
- High level: 10Hz - 100k Hz -0.4dB - +0 dB
Attenuation factor 20Hz - 20kHz at 8 ohms: 350
Input voltage and Impedance:
- Phono MM: 5.2mV / 47k 643961b8da111c0a15d770a1109a86d4
  - max.: 60mV
- High Level:
  - RCA: 340 mV/100k643961b8da111c0a15d770a1109a86d4
    - max.: 3.5V
  - XLR : 540mV/100k643961b8da111c0a15d770a1109a86d4
    - max.: 5.5V
Output voltage and impedance: 1.9V 100643961b8da111c0a15d770a1109a86d4
Tone control +/-10%:
- Bass: 100Hz
- Treble: 10kHz
Signal-to-noise ratio IHF-a:
- Phono MM: 80 dB
- High level: 102 dB
Channel separation or crosstalk attenuation:
- Phono MM: > 55 dB
- High level: > 55 dB

Phono MM: 5.2mV / 47k ohm
- max.: 60mV
High Level:
- RCA: 340 mV/100k643961b8da111c0a15d770a1109a86d4
  - max.: 3.5V
- XLR : 540mV/100k643961b8da111c0a15d770a1109a86d4
  - max.: 5.5V

Bandwidth -0.4 - +0.0dB: 20Hz- 20kHz
Signal-to-noise ratio IHF-a: 102dB
Input sensitivity and impedance: 0dBFS 75 ohm
Output voltage -20dB: 1.3Vpp
US bus Audio:
- Class 1: 24 -bit up to 96kHz
- Class 2: 24-bit 384kHz
  - only with corresponding Drivers
- DSD and DoP support