Philips FA 141 specifications

General

Connections

Technical data

When connecting only one pair of speakers, the outer terminals are occupied. With two pairs of speakers, the speakers are connected in series. Only 8-16 ohms allowed. A matching tuner can be connected via the 7-pin DIN socket (parallel to the RCA tuner input), this is then supplied with power via the amplifier. The tape switch takes precedence over the other three inputs. There was also a big brother at Quelle that corresponded to the FA 144 or FA 145, this one did not have the 7-pin DIN socket for radio, but two tape connections and more power. The two TAPE buttons were between the upper and lower switch row and the position of the switch next to loudness was occupied with something else.

Manufacturer: c1f456ee3fc507d644eb50420511ad91 (also sold as: Quelle Universum V 7455)
Model: FA 141
Years of manufacture: 1984/1985
Type: Integrated Amplifier
Remote Control: No
Power Consumption: 150 watts
Dimensions: 420 x 320 x 85 mm ( WxHxD)
Weight: 4.3kg
Color: Silver/Black
Factory price approx.:

Number of inputs:
- Phono, Tuner, Aux, Tape
Number of outputs:
- Speaker, headphones (8-1000643961b8da111c0a15d770a1109a86d4), Rec- Out

Phono, Tuner, Aux, Tape

Speakers, headphones (8-1000643961b8da111c0a15d770a1109a86d4), Rec-Out

Continuous power (with total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 32 Watt DIN
- 4 643961b8da111c0a15d770a1109a86d4: only 8-16 643961b8da111c0a15d770a1109a86d4 possible
Dynamic power
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 50 watt DIN
- 4 643961b8da111c0a15d770a1109a86d4:
Total harmonic distortion: 0.02% (0.008% at 8 ohm at 25Watt)
Damping factor: > 45 at 8 ohm 1kHz
Input (sensitivity/impedance)
- Phono 2.5mV/47 k643961b8da111c0a15d770a1109a86d4
- Aux, Tuner, Tape 150mV/47 k643961b8da111c0a15d770a1109a86d4
Output (level/impedance)
- Rec-Out 150mV/2.5k643961b8da111c0a15d770a1109a86d4
Frequency response: 10 - 45,000 (-3dB) / 20 - 20,000Hz (±1.5dB)
Tone control:
- Bass: ±12 dB (40 Hz)
- Treble: ±12 dB (20 kHz)
Loudness: switchable
Subsonic: No
Mute: No
Ripple voltage distance (short-circuited):
Stereo channel separation: > 60dB
Signal noise distance: 94dB

8 ohms: 2x 32 watts DIN
4 643961b8da111c0a15d770a1109a86d4s: only 8-16 ohms possible