Recording / Playback: Massive- Clear the Permalloy head: Double gap ferrite head
Special equipment Cassette deck
Tech nical data Power amplifier
Connections Power amplifier
Special equipment power amplifier
Loudspeaker box
Other functions of the system:
< p>Automatic shutdown
With CD or tape as a signal source, the device switches off automatically after 4 minutes
Time / timer
The integrated clock also allows time-controlled playback and recording times to be programmed.There is also a sleep timer (in 30-minute increments up to max. 2 Hours)
Motor-driven control panel panel
When switching on, the control panel panel is retracted to allow access to the control elements. When switching off, the control panel panel closes automatically. The button (OPEN/CLOSE) can also be used to open or close it manually. When the aperture is closed, the display field is dimmed.
name of the plant
The type designations lt. User manual is as follows:
Band Types: NORMAL (Type I), HIGH (Type II), METAL (Type IV)
Frequency Response:
Total Harmonic Distortion:
Signal-to-noise ratio:52 dB (after A-rating)
Auto-Reverse: YES (single, infinite)
Track Search: YES (TPS 4 seconds)
Dolby: no
MPX filter: no
Fader: no
Pitch control: no
CD synchro recording: yes
Automatic redigie recording
Continuous power (at distortion factor 10%)
6 ohm HIGH: 6 W per channel (music)
6 Ohm : LOW 14 W per channel (music)
Total BI-AMP power 20 W per channel
Total Harmonic Distortion: 10 %
AUX input sensitivity: 250 mV
AUX input impedance: 47 kΩ
Headphone output impedance: 16-32 Ω
Frequency response:
Signal-to-noise ratio:
Stereo channel separation:
6 Ohm HIGH: 6 W per channel (music)
6 Ohm : LOW 14 W per channel (music)
BI-AMP total power 20 W per channel
Number of inputs: 1
Analog Input Chinch
Number of outputs: 1
Optical digital output
Antenna connectors: AM /FM
Analog input Chinch
Optical digital output
Antenna connectors: AM / FM
Sound virutalizer function for sound enhancement (only switchable via FB)
Muting (only switchable via FB)
The speaker cabinets (2-way) do not have a crossover themselves. This is installed in the system. As a result, each speaker box must be connected with 2 pairs of cables. The bass speaker (LOW) was equipped via open cable ends by means of terminals, and the broadband speaker (HIGH) by means of a chinch plug.
Type of construction: 2-way speaker system
Super Woofer: 14 cm Cone type
Full-range speaker: 8 cm Cone type
Impedance: HIGH (6 Ω), LOW (6 Ω)
Power handling: HIGH 10 W (music), LOW 30 W (Music )
Output sound pressure level: 86 dB/W (1.0 m)
Transfer frequencies: 110 Hz
Frequency response: 43 Hz to 25 kHz (-16 dB), 52 Hz to 22 kHz (-10 dB)