Onkyo TX-SR 602 E specifications
Category : A/V-Receiver
Brand : Onkyo
brand: Onkyo
model: TX-SR 602 E
Other models from the same series:
- output power per channel at 6 Ohm s, 1 kHz, DIN: 120 W
- frequency response: 10 Hz - 100 kHz
- Vector Linear Shaping Circuitry (VLSC) for FL/FR
- Wide Range Amplifier Tech nology (WRAT)
- Reduced NFB (Negative Feedback)
- H. C. P. S. - Massive, enormously powerful transformer
- Optimum Gain Volume circuitry
- Fully discrete output stage circuitry for all channels
- high-current, low-impedance designed 6 Ohm operation for all channels
- For 4-Ohm speakers, suitable
- Automatic protection circuit
- Low Frequency Effect (LFE)-Level control
- Absolute Ground Plate (absolute equipotential bonding by means of the equal mass points all signal units)
- Audio/Video features:
- DTS
- DTS 96/24
- DTS-ES Discrete
- Matrix 6.1
- DTS NEO:6
- Dolby Digital EX
- Dolby Pro Logic IIx
- Linear PCM 192 kHz, 24-Bit D/A Converter
- component video Up-Conversion with a TBC (Time Base Corrector)
- Automated speaker Setup microphone
- Digital Upsampling
- HDTV-capable (50 MHz) reversible component connections (3 inputs/1 output)
- 32-Bit DSP Chip
- 32 DSP operating modes
- Non-Scaling configuration
- Y/C Mix circuit for monitor output
- A-Form Listening Mode Memory
- cinema filter
- Adjustable Subwoofer crossover frequency (60/80/100/120/150 Hz)
- Double Bass
- Zone 2 capability, including switchable power amplifiers
- connections:
- 5 S-Video inputs
- 3 S-Video outputs
- 3 component video inputs
- 1 component video output
- 2 audio inputs
- headphone output
- 5 A/V inputs
- Zone 2 Line output
- 1 digital output (optical)
- 4 digital inputs are freely assignable
- Color-marked 5.1 multi-channel
- input for DVD-Audio & Super Audio CD
- heavy-duty, the colour of the selected speaker cable connection terminal (banana plug)
- pre-amp output for the Subwoofer
- video signal conversion from Composite to S-Video
- Pure Audio mode
- Direct mode
- Automatic signal detection
- Late Night mode (high, low, off)
- the Rec Out Selector (Audio) for tape deck recording
- Bass and treble controls (L/R)
- FM/AM Tuner Features:
- 40 FM/AM preset memory
- Character Input (Tuner preset buttons, input selection switch)
- FM Auto Scan Tuning
- FM Stereo Indicator
- 75-Ohm antenna input
- Intelli volume, individual volume adjustment for each signal source
- IR input
- 12 V Trigger for the 2. Listening area
- display of the absolute volume
- On-Screen Display
- Separate sections for Audio and Video signal processing
- DOT-Matrix-Display, 35 display segments
- 3-mode Display Dimmer (bright, normal, dark)
- Individ uuelle input switch for each source
- DTS
- DTS 96/24
- DTS-ES Discrete
- Matrix 6.1
- DTS NEO:6
- Dolby Digital EX
- Dolby Pro Logic IIx
- 5 S-Video inputs
- 3 S-Video outputs
- 3 component video inputs
- 1 component video output
- 2 audio inputs
- headphone output
- 5 A/V inputs
- Zone 2 Line output
- 1 digital output (optical)
- 4 digital inputs are freely assignable
- Color-marked 5.1 multi-channel
- input for DVD-Audio & Super Audio CD
- heavy-duty, the colour of the selected speaker cable connection terminal (banana plug)
- pre-amp output for the Subwoofer
- 40 FM/AM preset memory
- Character Input (Tuner preset buttons, input selector switch)
- FM Auto Scan Tuning
- FM Stereo Indicator
- 75-Ohm antenna input
Comment:
Comment box:
Onkyo TX-SR 602 E relate