Onkyo TX-200 specifications

Category : Receiver

Brand : Onkyo

Onkyo Stereo Receiver TX-200

General :

connections:

Technical data:

Tuner:

as --> TX-26

Other models from the same series:

number of inputs:
- Phono MM
- Phono ground terminal
- CD
- Tape 1/ Video (Audio)
- Coaxial FM antenna terminal (75-643961b8da111c0a15d770a1109a86d4)
- connector ON the antenna
number of outputs:
- 2 x Pair of speaker connectors
- headphone output 6.3 mm Jack

amplifier
the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 38 watts (0,08 % THD 20 - 20 khz)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 50 W (1 khz, DIN)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 40 watts (1 khz, DIN)
music power:
- 8 643961b8da111c0a15d770a1109a86d4: 2x 53 watts (1 khz, DIN)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 80 watts (1 khz, DIN)
total harmonic distortion: 0.08 to %
damping factor: 35 at 8 ohms
frequency response: 20 - 30,000 Hz
signal-to-noise ratio:
- Phono: 85 dB
- Line: 95 dB (80 dB, IHF A-202)
stereo channel separation:
sound-control:
- Bass: ± 8 dB at 100 Hz
- treble: ± 8 dB at 10 khz
Loudness -30 dB:
- + 7 dB at 70 Hz,
- + 5 dB at 10 khz
High Filter :
Low Filter (Subsonic):
Mute:
Direct/Line-Straight:

channels: AM, FM
frequency:
- FM (FM): 87.5 - 108.0 Mhz ( 50 khz steps)
- AM (MW): 522 - 1,611 khz (9 khz steps)
frequency response: 30 - 15,000 Hz
input sensitivity:
total harmonic distortion:
- Mono: 0,15 %
- Stereo: 0.3 to %
signal-to-noise ratio:
- Mono: 71 dB
- Stereo: 66 dB
channel separation:
selectivity:
frequency selection:
in addition to the wave selection:
mirror frequency attenuation: 85dB
if rejection: 90dB
ON-suppression:
output level:
RDS: No
station memory: Yes