Omnitronic P-1000 specifications

Category : Power amplifiers

Brand : Omnitronic

Brand: Omnitronic

Model: P-1000

Number of channels: 2

Other models of the same series:

  • Power supply: 115/230 V AC, 50/60 Hz
  • Dielectric strength: 230 V ± 10 % ( 206 V - 253 V)
  • Total connection value (max.): 1300 W
  • Short-term peak power at 1 kHz: 1270 W / 4 Ohm s
  • Output Power Sine Wave:
    • Stereo 4 ohms 2 x 500 W
    • Stereo 8 ohms 2 x 245 W
    • 8 ohms bridged 1 x 850 W
  • Frequency range: 22 - 31 000 Hz< /li>
  • Attenuation factor: > 200
  • Total harmonic distortion: 0.01 %
  • Noise voltage range: 108 dB
  • Cooling: 2 fans (start at about 40°C)
  • Channel separation (at 1 kHz): 89 dB
  • Minimum input voltage: 0.77 V/26 dB /1.44V
  • Input impedance:
    • 12 kOhm (unbalanced)
    • 22 kOhm (balanced)
  • Inputs:
    • 2 x XLR
    • 2 x Jack
  • Outputs:
    • 2 x Speaker (stereo)
    • 1 x Speaker (bridge)
    • 2 x Banana/screw combination
  • Controls:
    • Power Switch
    • Volume Control (one per channel)
    • Opera tion Selector Switch-Stereo/Parallel/Bridged,
    • Ground Lift
    • Bridged switch for bridge operation< /li>
  • Input level select (0.77 V/26 dB/1.44 V)
  • Protection circuit: short-circuit protection circuit, DC voltage protection circuit, thermal protection circuit, soft start
  • All operating states can be read via LEDs
  • LED intensity can be set via brightness control on the back
  • Dimensions (W x D x H): 440 x 482 x 100 mm
  • Stereo 4 Ohm 2 x 500 W
  • Stereo 8 Ohm 2 x 245 W
  • 8 ohm bridged 1 x 850 W
  • 12 kOhm (unbalanced)
  • 22 kOhm (balanced)
    < li>2 x XLR
  • 2 x jack
  • 2 x Speaker (stereo)
  • 1 x Speaker (bridge)
  • 2 x Banana/screw combination
  • Power switch
  • Volume control (one per channel)
  • Opera tion selector Switch-Stereo/Parallel/Bridged,
  • Ground Lift
  • Bridged switch for bridge operation

Omnitronic P-1000


Comment:



Comment box:


Omnitronic P-1000 relate