Active speaker equalization for Nubert NuWave 35 compact speakers
Other models in the same series:
1 data
2 comments
3 pictures
4 reports
5 links< /li>
Manufacturer: Nubert
Model: ATM 35
Years of manufacture:
Manufactured in: D
Color: Housing black, front panel aluminum
Remote control: not available
Power supply: Plug-in power supply +/- 15V DC
Current consumption: Max. 102mA / 83ma; Standby 30mA
Power consumption: 5VA
Dimensions: WxHxD 109 x 50 x 190mm
Weight: 560g / plug-in power supply 430g
Factory price approx.: 265.- € (2005)
Number of inputs: 3 High level
RCA 3 x L/R
Number of outputs: 1
RCA 1 x L/R
Rca 3 x L/R
Rca 1 x L /R
Adjustable frequency bands: 2
Control range: Bass / center frequency 33Hz/ 0 to +9dB (EQ "linear"), up to +15.5dB "Max."
Frequency range 29Hz to 20kHz linearly tiltable by ± 7dB at 20kHz
Frequency response: 29Hz to > 110KHz (-3dB)
Bass EQ: +9dB Increase in the bass range corresponds to a linear frequency response extension of Nubert NuWave 35 loudspeakers by about 12Hz. The lower cut-off frequency (-3dB) shifts from 53Hz without ATM down to 41Hz with ATM.
Gain: 0dB
Signal-to-noise ratio: 124dB (in words: one hundred and twenty-four!), since many measuring amplifiers are already getting tired before!
Total harmonic distortion: -102dB (0.00079%) at 1kHz, 0dBu (775mVeff)
automatic switch-on by audio signal, switch-on threshold 0.2mVeff at 1kHz; switchable
Gain switchable internally to -10dB
Delivered in an attractive plastic case< /li>
two high-quality RCA connection cables included
an individual measurement protocol provided with S/N of the respective ATM module is included
Extension of the low-frequency transmission range of the NuWave 35 loudspeakers from 53Hz (-3dB) to 41Hz (-3dB)
Reduction below 29Hz with a 4th order filter (24dB/ Octave )
Stereo version, i.e. a device is required for stereo playback.