type: DSP-controlled stereo power amplifier with switching amplifiers
remote control for ON/OFF
dimensions: WxHxD 230x80x280 (without the feet, by way of derogation, if the front panel higher than the corpus)
weight:
factory price approx.: ab 849,-
number of inputs:
2x XLR (right/left)
2x RCA (right/left)
number of outputs:
2x speaker jacks f. Bananas
2x XLR (right/left)
2x RCA (right/left)
2x speaker jacks f. Bananas
continuous power
8 Ohm : 2x50 watts
4 Ohm : 2x90 Watt
total harmonic distortion:
<0.05% at 75 watts / 4 Ohm s
frequency response: 20 - 35.000 Hz (+-0.5 dB)
signal-to-noise ratio: >95dB
stereo channel separation: ~80dB/1kHz/1Watt
8 Ohm : 2x50 watts
4 Ohm : 2x90 Watt
<0.05% at 75 watts / 4 Ohm s
3-channel DSP with per channel
10 freely selectable Filter per channel (Bell, Notch, high-pass filter with variable Q, low pass with variable Q, High Shelf, Low Shelf, band-pass, All-pass)
10 freely selectable filters per input (as above)
high-pass/low-pass per output and input, Bessel 6/12/18/24, Butterworth 6/12/18/24, Linkwitz/Riley 6/12/18/24
Limiter / Delay (inputs up to approx. equivalent to 8 meters, output up to about 2 meters)
10 freely selectable Filter per channel (Bell, Notch, high-pass filter with variable Q, low pass with variable Q, High Shelf, Low Shelf, band-pass, All-pass)
10 freely selectable filters per input (as above)
high-pass/low-pass per output and input, Bessel 6/12/18/24, Butterworth 6/12/18/24, Linkwitz/Riley 6/12/18/24
Limiter / Delay (inputs up to approx. equivalent to 8 meters, output up to about 2 meters)