Category : Integrated amplifier
General
Technical dataGeneral Weight 23 kg / 50.7 lbs Dimensions (without cable) W 45.0 cm / D 44.5 cm / H 14.5 cm a956e985535b8d57732d14dfa0e4c71ating voltage 230 Vac / 50 Hz or 115 Vac / 50/60 Hz(factory setting depending on country) Power consumption Standby by < 0.5 VA a956e985535b8d57732d14dfa0e4c71ation < 70 VA Maximum < 1000 VA (W. 2 x 300 W @ 4 ohms) Connections Inputs RCA unbalanced 2 x MBL CD1 / CD2 2 x Tuner AUX1 / AUX2 1 x Processor By-pass XLR balanced (unity gain) 1 x Balanced options 1 x optional second balanced input (XLR ) or 1 x optional phono module (RCA) Outputs RCA unbalanced 1 x Variable output 1 x Fixed Record output Speaker 1 pair 2 x MBL SmartLink Preamplifier section Output level / max. Output voltage Variable unbalanced RCA outputs 0 ... 5V @ 2V input, max 1.7V *1 (depending on volume setting)
Fixed Record output 2V @ 2V Input, max. 8 V Optimum / maximum Permissible input power(All in - and outputs on Phono) 2 V / 8V (depending on volume setting) the pin assignment In Phase = RCA inner conductor / XLR Pin 2 frequency range(All inputs and outputs to the Phono) DC - > 200 kHz, the output impedance of All the RCA outputs, 100 643961b8da111c0a15d770a1109a86d4 input impedance CD, and Processor By-b9b57aae83585e17ede4570dcede353c inputs ≥ 5 k643961b8da111c0a15d770a1109a86d4 AUX in inputs 50 k643961b8da111c0a15d770a1109a86d4 XLR inputs, 10 k643961b8da111c0a15d770a1109a86d4 signal to noise ratio(All in - and outputs on Phono) > 110 dB (A) @ 2 V Input, Volume set to 0 dBr / unity gain channel separation(All in - and outputs on Phono) > 100 dB @ 1 kHz Total Harmonic Distortion + Noise(All in - and outputs on Phono) < 0.001 % @ 2V Input / 1kHz, Volume set to 0 dBr / unity gain amplifier section rated power Stereo 4 643961b8da111c0a15d770a1109a86d4 2 x 300 W rated power Stereo 8 643961b8da111c0a15d770a1109a86d4 2 x 180 W nominal power Stereo 2 643961b8da111c0a15d770a1109a86d4 2 x 400 W output peak voltage 62 Vp output peak current 20 Ap input sensitivity (RCA / XLR ) 100 mV for 1 W @ 4 643961b8da111c0a15d770a1109a86d4 nominal input voltage (RCA / XLR ) 1.70 V for 300 W @ 4 643961b8da111c0a15d770a1109a86d4 input voltage gain of 20 (26 dB) pin assignment In Phase = RCA inner conductor-to-noise ratio at rated output of 122 dB (A) @ 300 W / 4 643961b8da111c0a15d770a1109a86d4s signal to noise ratio 1 Watt 98 dB (A) @ 1 W / 4 643961b8da111c0a15d770a1109a86d4s Input referred noise of 124 dB (A) @ 2 V Input frequency range < 10 Hz – 45 kHz total harmonic distortion THD+N type. 0.01 % @ 3 W from 20 Hz ... 20 kHz Attenuation factor > 100 (40 dB) @ 1 kHz / 4 ohm Channel separation > 90 dB @ 1 kHz
Special equipment