Marantz 2600 specifications

Category : Receiver

Brand : Marantz

General

Connections

Technical data

Amplifiers

Tuners

Special equipment

2x Tape In, Aux (2x at europ. Model): 180 mV / 20 k643961b8da111c0a15d770a1109a86d4
2x Phono: 1.8 mV / 47 K-ohms
antenna FM (75/300 643961b8da111c0a15d770a1109a86d4) / MW
Dubbing in
Main

the duration of the performance: (20-20.000 Hz, <0,03%, RMS)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 300 W (2x 340 W according to DIN)
- 4 643961b8da111c0a15d770a1109a86d4: 2 x 400 W (2 x 420 W according to DIN)
dynamic power:
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0.03% of
damping factor: 40 (8 643961b8da111c0a15d770a1109a86d4)
frequency response:
- Aux, Main In: 10 - 60,000 Hz (±1 dB)
- Phono: RIAA ±0.2 dB
signal-to-noise ratio:
- Aux: 95 dB
- Phono: 80 dB
stereo channel separation:
sound control: (each L/R separated)
- Bass: Yes, Turnover: normal / 100 Hz
- in the Middle: Yes
- height: Yes, Turnover: normal / 10 kHz
Loudness: Yes
High Filter : 9 kHz (18 dB/oct.)
Low Filter (Subsonic): 15 Hz (18 dB/oct.)
Mute: FM Muting
Direct/Line-Straight: no

receiving: FM/MW
frequency:
- FM: 87.5 - 108 Mhz
- MW: 525 - 1.605 kHz
frequency response: 30 - 15,000 Hz (from+0.2/-1 dB)
input sensitivity:
- FM: 1.5 µV
- MW: 15 µV
total harmonic distortion: (1kHz)
- FM: 0,1% (Mono), and 0.2% (Stereo),
- mesh size: 0.4%
signal-to-noise ratio:
- FM: 82 dB (Mono), 75 dB (Stereo)
- MW: 55 dB
channel separation:
- FM: 50 dB (at 1 kHz)
selectivity:
frequency selection:
- FM: 1 dB
in addition to the wave selection:
- FM: 85 dB
mirror frequency attenuation:
- FM: 120 dB
ZF-loss:
- FM: 120 dB
ON-suppression: 60 dB