Luxman SQ 507 specifications
Category : Integrated amplifier
Brand : Luxman
General
Connections
Technical data
Special equipment
Other models of the same series:
Gallery: Please click on the picture to enlarge. Back with arrow "One side back"
- Manufacturer: Luxman
- Model: SQ 507
- Type: Integrated Amplifier
- Years of construction: 1968 - 1975
- Manufactured in: Japan
- Color: Alu/veneer
- Remote control: no
- Power consumption: approx. 200 W
- Dimensions (WxHxD): 450 x 160 x 268 mm
- Weight: 11 kg
- Factory price approx.: 70'000 yen (Japan, 1968), 1.670,- DM
- Number of inputs: 5 (Tape, Aux1, Aux2, Phono1, Phono2)
- list the inputs here (with sensitivity/impedance)
- Number of outputs: 2 pairs of speakers, Rec out (RCA), preamplifier (RCA); cold unit sockets.
- list the inputs here (with sensitivity/impedance)
- Continuous power (with total harmonic distortion)
- Dynamic power
- Total harmonic distortion: 0.2
- Attenuation factor: 35
- Frequency response: 20 - 50,000 Hz (+0/-1db)
- Signal-to-noise ratio: 70db
- Stereo channel separation: 60db
- Tone control:
- Bass: 12db (switchable to 150, 300 and 600 Hz)
- Treble: 12db (switchable to 1.5, 3 and 6 kHz)
- Loudness: yes (80 Hz, 6db/0ct)
- High Filter : yes (5 kHz, 6db/oct)
- Low Filter (Subsonic): yes (100 Hz, 6db/ 0ct)
- Mute: -12db atenuator
- Direct/Line-Straight: no
8 Ohm : 4 Ohm :- Bass: 12db ( switchable to 150, 300 and 600 Hz)
- Treble: 12db (switchable to 1.5, 3 and 6 kHz)
- Preamp and power amp can be used independently.
- Phono1 impedance: 3 settings selectable: 30, 50 and 100 kOhm
- Aux1 has an impedance of 100 kOhm and can regulate the input volume.
- Aux2 has an impedance of 200 kOhm
Comment:
Comment box:
Luxman SQ 507 relate