Category : Manufacturer
The company owner is Dipl.-Ing. Norbert Lehmann. Lehmannaudio was founded in 1988, initially with a focus on sound recordings. From 1992 onwards, phono preamplifiers, balancing stages and preamps were manufactured in small series under the ENTEC label. At the beginning of 1998, the company name was changed to Lehmannaudio. The Black Cube Phono preamplifier has been on the market since 1995. The reference phono preamp Silver Cube has been around since 2002.
In 2004, the headphone amplifier Black Cube Linear appeared, which is now sold only under the name Linear.
In July 2007 the relocation from Köln Porz to Bergisch Gladbach took place. Since August 2010 the company Lehmannaudio Vertriebs GmbH has been merged into the company Lehmannaudio. Lehmannaudio products are available in about thirty countries worldwide.
Since March 2018, the company's headquarters have been back in Cologne
Phono Preamplifier
Black Cube Statement - MM/MC Phono preamplifier. Four gain settings (31db; 41dB; 51dB; 61dB). A slot for dialing impedance. Power supply: Wide-range switching power supply (since about January 2011)
Black Cube - MM/MC phono preamp. Four gain settings (36db; 46dB; 56dB; 66dB). 2x slot for dial impedance.
Black Cube SE - MM/MC Phono preamp. Four gain settings (36db; 46dB; 56dB; 66dB). 2x slot for dial impedance.
Black Cube SE II - MM/MC Phono preamp. Four gain settings (36db; 46dB; 56dB; 66dB). 2x slot for dial impedance.
Decade - MM/MC phono preamp with Class-A output stage without over-all feedback. Four gain settings (36db; 46dB; 56dB; 66dB). Gain can be switched on the front side. Capaciti es can be selected via DIP switches. A slot for dialing impedance. Power supply: Linear power supply with specially made toroidal transformer with grounded shield winding (static shield).
Decade Jubilee - Completely newly developed inner life of the Decade with Mundorf tin foil capacitors in the RIAA network. Equipped with 3S device feet as standard.
Silver Cube - MM/MC phono preamp in solid milling housing with FET Class-A output stage without over-all feedback. Four gain settings (36db; 46dB; 56dB; 66dB). Gain can be switched on the back with channel separation. Capaciti es can be selected via DIP switches. A slot for dialing impedance. Since May 2011, partly with amagnetic TKD resistors in the small signal path, Mundorf tin foil capacitors in the RIAA network, WBT Nextgen RCA jacks, 3S device feet for power supply and audio part.
Headphone amplifier
Hifi Headphone Amplifier
Rhinelander headphone amplifier with Class-A output stage without over-all feedback. Power supply: Wide-range switching power supply (since about January 2011) - Production discontinued
Linear headphone amplifier with Class-A output stage without over-all negative feedback. Power supply: Linear power supply with specially manufactured toroidal transformer with grounded shield winding (static shield)
Linear II headphone amplifier with Class-A output stage without over-all negative feedback. Power supply: Linear power supply with specially made toroidal transformer with grounded shield winding (static shield) The Linear II mainboard is equipped with LOWZ copper, Mundorf capacitors in the power supply and signal path and mica capacitors. The device has the 3S device feet as standard.
Linear D headphone amplifier with Class-A output stage without over-all feedback. Power supply: Linear power supply with specially made toroidal transformer with grounded shield winding (static shield). Additionally built-in DAC with optical (Prio 1) and coaxial (Prio 2) input. The digital inputs are prioritized among themselves. If no digital signal is detected, an automatic fallback to the analog input takes place. This makes it possible to use it as a preamplifier for two digital and one analog source. The Linear II mainboard is equipped with Lowz copper, Mundorf capacitors in power supply and signal path and mica capacitors. The device has the 3S device feet as standard.
Linear USB headphone amplifier with Class-A output stage without over-all feedback. Additionally built-in USB D/A converter. The source selection is automatic: The USB converter is switched on as soon as the Linear USB detects a valid audio data stream.
Linear SE
Pro-Audio Headphone Amplifier
Linear Pro - Professional Headphone amplifier with XLR connectors
Linear II Pro - Professional headphone amplifier with XLR connectors and Linear II Mainboard
StudioCube
Linear Pro
Power Amplifiers
Stamp - 2x20W audiophile small power amplifier with bi-wiring capability
Stamp SE - 2x20W audiophile small power amplifier with bi-wiring capability, device installed in special housing. Mundorf signal capacitors, 3S device feet and AHP fuse as standard. The case is also available in veneered real wood.
Accessories
3S Instrument feet - Based on the fabric discs by Manfred Diestertich (Audio Physic ), further developed instrument feet were brought to the market by Lehmannaudio. The recommended maximum load capacity of a set of 4 is 24 kg:
Point 1 - heavy plastic foil as top part
Point 2 - Aluminum disc with spike mount as top part
Point 3.6 - fixed M6 threaded rod (20mm) as top part
Point 3.8 - fixed M8 threaded rod (20mm) as top part
Stage1 plate mat - 6mm Facebook Instagramm