Type of construction: 3-way compact loudspeaker, closed, active
Chassis:
Woofer: 200 mm (coated diaphragm)
Midrange: 51 mm supronyl dome
Tweeter: 25 mm hardened aluminium dome with supronyl clamping
Output power amplifiers: total. 240 Watt Sine Wave (IHF)
Woofer: 80 Watt Sine wave
Midrange: 80 Watt Sine wave
Tweeter: 80 Watt Sine wave
Frequency response: 37 - 22,000 Hz ±3 dB
Transition ranges: (for LS with multiple chassis)
Input sensitivity: 2.1V / 90dB / 1000Hz
Maximum power consumption : 360 Watts
Woofer: 200 mm (coated diaphragm)
Midrange: 51 mm supronyl dome
Tweeter: 25 mm hardened aluminum dome with supronyl clamping
Woofer: 80 watt sine
Midrange: 80 Watt sine
Tweeter: 80 Watt sine
3 built-in power amplifiers --> separately controlled chassis to increase dynamics and resolution.
Switchable bass attenuation at 38Hz : Switch position 0, 1 and 2 cause a bass level reduction by 0dB, 3dB or 6dB so that room adjustments can be realized.
Fully compatible,- and power amplifier compatible, because the 5-pin DIN socket installed for connection has a contact routed via a series resistor provided for this purpose. --> Pin.2 = [Ground] ; Pin.4 = [LS+]. --> With a "5-pin Din to 2 times RCA" adapter : black/white connector. (the preamplifier is operated via the red side)
Intelligent automatic switching on and off --> The LS only switches on when there is a frequency mixture below 850Hz, not when there is a network crack or other interference signals. The automatic shutdown takes place after an 8-minute signal break. In addition, the KS Aktiv 3 switches off to protect the chassis if the level or voltage peaks are too high and reactivates itself automatically after a few seconds.
discretely constructed power amplifiers --> no power amplifiers IC's
1% tolerance on metal film resistors used ; 5% tolerance on installed film capacitors of the frequency diverters.
The front of the LSs is provided with a velvet-like flocking to avoid sound losses due to reflections and the resulting interference formation on the baffle.
Optional : A base frame suitable in style and wood design to expand the installation possibilities of the "power dwarf" designed as a compact or shelf speaker.