Kenwood KX-5010 specifications

Brand : Kenwood

General

Tech nical data

Special equipment

Other models of the same series:

RF premagnetization: 105 kHz
Sound heads: 2 (amorphous alloy recording/playback head, extinguishing head Double-gap ferrite)
Motors: 3 (1 FG servo motor for tonal wave direct drive, 1 DC auxiliary motor each for winding plate and mechanism)
Synchronisation fluctuations: 0.025 % (effect. rated) / 0.075 % (DIN)
Band types: IEC Type I, II, IV
Transmission range/Frequency response:
- Type IV: 20 Hz - 21 kHz (+/- 3 dB)
- Type II: 20 Hz - 19 kHz (+/- 3 dB)
- Type I: 20 Hz - 18 kHz (+/- 3 dB)
- /li>
Total harmonic distortion: < 0.8 % (1 kHz)
Signal-to-noise ratio (type IV):
- with Dolby C: 74 dB
- with Dolby B: 67 dB
- without Dolby: 59 dB
Input sensitivity/impedance :
- Line RCA/RCA R/L = 77.5mV / 50 kOhm
- Microphone 6.35mm jack R/L = 0.3mV / 600 ohm
Output level/impedance:
- Line RCA/RCA R/L = 490 mV/ 2 kOhm
- Headphones 6.35mm jack = 30 mW / 8 Ohm (level controller max.)
Noise reduction Dolby B, C, dynamic range HX-Pro

KX-1010

KX-3010

KX-3510

KX- 5010

KX-9010

Predecessor model: KX-880 HX - with the KX-5010, the newly established 5000 series began

Successor model:
- KX-5030
- KX-7030 (was priced and in some Equipment points the successor, newly created 7000 series)

KX-7030 (was the successor, newly created 7000 series in terms of price and in some equipment points)

STEREO 7/1989 Comparison test: Test victory together with Onkyo TA-2570, stereo recommendation: Excel lent, 3 stars. Top-class quality level, 80 %. In it, sound quality 84%, practicality 77%, workmanship 67%, equipment 58%. "Plus: + very good sound quality, + robust drive with direct drive, + perfect measuring computer, + careful processing, + reasonable equipment. Minus: - moderate Me dynamics, - sluggish final shutdown" (Ibid p.29).

Kenwood KX-5010